Operation Manual

9.1. Host Name and System Time Setting

Press the first category: <System> in the left column; the page is shown below.

Host Name :

The name is for camera identification. If alarm function (see section 9.8. Application) is enabled and is set to send

an alarm message by Mail/FTP, the host name entered here will display in the alarm message.

Time Zone :

Select the time zone you are in from the drop-down menu.

Sync with Computer Time :

Select the item, and video date and time display will synchronize with the PC’s.

Manual :

The Administrator can set video date, time and day manually. Entry format should be identical with that shown

next to the enter fields.

Sync with NTP server :

Network Time Protocol (NTP) is an alternate way to synchronize your camera’s clock with a NTP server. Please

specify the server you wish to synchronize in the enter field. Then select an update interval from the drop-down

menu. For further information about NTP, please see the web site: www.ntp.org.

9.2. Security

Click the category: <Security>, there will be a drop-down menu with tabs including <User>, <HTTPS>, <IP Filter>,

and <IEEE 802.1X>.

English