Operation Manual

Step 5: Then the dialogue box for entering the default username and password (as shown below) will appear

for logging in to the IP Dome Camera.

The default login ID and password for the Administrator are:

Password: 1234

NOTE: ID and password are case sensitive.

It is strongly advised that administrator’s password be altered for security concerns. Refer to section 9.2.

Security for further details.

Additionally, users can change the IP Camera’s network property, either DHCP or Static IP, directly in the device

finding list. Refer to the following section for changing the IP Camera’s network property.

Example of changing IP Camera’s network property :

Users can directly change an IP Camera’s network property, e.g. from static IP to DHCP, in the finding device list.

The way to change the IP Camera’s network property is specified below:

Step 1: In the ﬁnding device list, click on the IP Camera of which you would like to change the network property.

On the selected item, right-click and select “Network Setup”. Meanwhile, record the IP Camera’s MAC address,

for future identification.

English