Operation Manual

Ethernet Cable Connection:

Use of Category 5 Ethernet cable is recommended for network connection; to have best transmission quality,

cable length shall not exceed 100 meters. Connect one end of the Ethernet cable to the RJ45 connector of the IP

Camera, and the other end of the cable to the network switch or PC.

NOTE: In some cases, you may need use an Ethernet crossover cable when connecting the IP Camera directly to

the PC.

Check the status of the link indicator and activity indicator LEDs; if the LEDs are unlit, please check LAN

connection.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

5. Deleting the Existing GRUNDIG Viewer

For users who have installed the GRUNDIG Viewer for 1.3 Megapixel Series IP Cameras on the PC, please first

delete the existing GRUNDIG Viewer from the PC before accessing this IP Camera.

Deleting the GRUNDIG Viewer :

Click “Control Panel”, and then click on “Add or Remove Programs”. In the “Currently installed programs” list,

select “GRUNDIG Viewer” and click the button “Remove” to uninstall the existing GRUNDIG Viewer as shown in

the figure below.

Deleting Temporary Internet Files :

To improve the browser performance, it is suggested to clean up all the files in the Temporary Internet Files. The

procedure is as follows (for other web browsers please read the corresponding manuals):

English