Operation Manual

- Sequence Line:

Please select the number of Sequence Lines to be set from the drop-down list on the top of the Sequence setting

menu.

- Sequential Preset Points Setting:

Please set up each Preset Point of the programmed Sequence Line in order, by assigning a Preset Point from the

“Name” list to the specified number of Preset Point and entering both Dwell Time (0~225) and Speed (0~20) into

the corresponding fields.

When finishing the sequential Preset Points setting, please click the button “Save” in the top of the Sequence

setting menu.

Sequence Run :

Select the specified Sequence Line from the drop-down list, press the “Go” button, and then the camera will start

moving forward each scene sequentially as programmed.

To view the camera executing a Sequence Line in full screen mode, please move the cursor onto the live view

pane, right-click and left-click to select “full screen”. Then users can view the camera navigation in full screen.

To stop running the Sequence Line, simply move the cursor to the live view pane and move the camera in any

direction.

11.5. Home Function

Users are able to set an operation mode to ensure constant monitoring. If the network Speed Dome Camera idles

for a period of time, the selected function will be activated automatically; this is the HOME function. The HOME

function allows constant and accurate monitoring to avoid the Dome Camera idling or missing events.

Home Setting :

- Activate/Disable Home Function:

Select “On” or “Off” to activate or disable the Home function. Then press the “Set” button to save the setting.

English