Operation Manual

11. PTZ Settings

Under the “PTZ” category, users are allowed to program Preset Point(s), Cruise Line(s), Auto Pan Path(s) and

Sequence Line(s) via PTZ controls. Additionally, various camera settings including Auto Exposure (AE), White

Balance (WB), Back Light Compensation (BLC), Sharpness, Exposure Compensation, Digital Zoom, etc. can also

be set here.

11.1. Preset Programming

Totally 256 Preset Points can be programmed for the network Speed Dome Camera. Please refer to the

instructions below to set a Preset Point.

Preset Setting :

To set up a Preset Point, please first move the cursor to the live view pane. Then left-click and drag the red

pointer with the PTZ controls to a desired position. Subsequently, assign a number for the current position from

the drop-down Number List, and enter its descriptive name. Press the button “Set” to save the setting.

Preset Go :

To have the camera move to a specified Preset position, please select the Preset Point from the drop-down

Preset List. Then the camera shall readily move to the target position.

English