Operation Manual

9.17. Software Upgrade

Software upgrade can be carried out on the “Software Upgrade” page, as shown below.

NOTE: Make sure the upgrade software file is available before carrying out the software upgrade.

The procedure of a software upgrade is as follows:

Step 1: Click “Browse” and select the binary ﬁle to be uploaded, e.g. Userland.jffs2.

NOTE: Do not change the upgrade file name, or the system will fail to find the file.

Step 2: Pull down the upgrade binary ﬁle list and select the ﬁle you want to upgrade; in this case, select

“userland.jffs2”.

Step 3: Press “Upgrade”. The system will ﬁrst check whether the upgrade ﬁle exists or not, and then begin to

upload the upgrade file. Subsequently, the upgrade status bar will display on the page. When 100% is reached,

the upgrade process is finished.

After the upgrade process is finished, the viewer will return to the Home page.

Step 4: Close the video browser.

Step 5: Click “Control Panel”, and then double-click on “Add or Remove Programs.” In the “Currently installed

programs” list, select “GRUNDIG Viewer” and click the button “Remove” to uninstall the existing GRUNDIG

Viewer.

Step 6: Open a new web browser, re-login the IP Camera, and then allow the automatic download of the

GRUNDIG Viewer.

English