Operation Manual

- Upload Image by E-Mail:

Select this item, and the Administrator can assign an e-mail address and configure various parameters as shown

in the figure below. When the alarm is triggered, event images will be sent to the appointed e-mail address.

NOTE: Make sure SMTP or FTP configuration has been completed. See section 9.5. Mail and 9.6. FTP for further

details.

- Function:

Assign a camera function: Preset, Sequence, Auto Pan or Cruise, and specify a Preset Point/Sequence Line/Auto

Pan Path/Cruise Line for the camera to perform at an alarm occurrence.

NOTE: Please refer to the sections through 11.1. Preset Programming to 11.4. Sequence Line Programming for

details of Preset Point / Sequence Line / Auto Pan Path / Cruise Line setups.

English