Operation Manual

9.6. FTP

The Administrator can set to sending alarm messages to a specific File Transfer Protocol (FTP) site when motion

is detected. Users can assign an alarm message to up to two FTP sites. The FTP setting page is shown below.

Enter the FTP details, which include server, server port, user name, password and remote folder, in the fields.

Click “Save” when the setting is finished.

9.7. Application (Alarm Settings)

The camera model GCI-C0735P supports 4 alarm inputs and 1 alarm output (NC/NO), the camera model

GCI-C0745P supports 8 alarm inputs and 1 alarm output (NC/NO). Please make sure the alarm connections

are properly wired before starting to configure alarm related settings on this “Application” page.

English