Operation Manual

ENGLISH
20
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Delet not available stations from
the station list
The names of the DAB stations remain in the
station list even after a new automatic search.
However, these DAB stations can no longer be
received and the names can be deleted from the
station list.
1 Press »MENU« to open the DAB menu.
2 Select the option »Prune invalid« by pressing
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
3 Select the push button »YES« by pressing
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
– The names of the DAB stations which are
now invalid are deleted.
Saving DAB radio stations on
presets
You can use the remote control to fill 10 presets
with the DAB radio stations of your choice. If you
assign the presets again, the previously saved
stations are overwritten.
1 Search for the DAB station as described.
2 To save stations, keep pressing the number but-
ton »1...0« until »Preset stored« appears in the
display.
– The station stored with a preset number then
appears in the display.
3 To store more stations, repeat steps 1 and 2 as
many times as necessary.
Setting Dynamic Range Control
(DRC) for DAB stations
When you activate Dynamic Range Control
(DRC), you can hear quiet sounds better in a
loud environment.
1 Press »MENU« to open the DAB menu.
2 Select the option »DRC« by pressing » « or
» « or by turning the Jog-Shuttle and confirm
by pressing »OK«.
– Display: e.g. »DRC off« (no DRC).
3 Select the value (»DRC high« or »DRC low«)
by pressing » « or » « or by turning the Jog-
Shuttle and confirm by pressing »OK«.
Note:
T
The DAB station must support DRC.
Setting FM stations
Setting the search mode
There are two different automatic scan setting
modes.
1 Press »M« repeatedly on the remote control or
»MODE« on the device until »FM radio« ap-
pears on display.
2 Press »MENU« to open the »FM« menu.
Time/Date
FM
Scan setting
Audio setting
System settings >
Main menu >
3 Select the option »Scan setting« by pressing
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
– Display: »Strong stations only?«.
4 Select your setting (»YES« or »NO«) using
» « or » « or by turning the Jog-Shuttle and
confirm by pressing »OK«.
5 Press »MENU« to end the setting.