DECT-TELEPHONE CALIOS A1 CALIOS 1
CONTENTS _____________________________ 5-7 5 5 5-6 7 7 7 7 8-13 INITIAL SETUP 8 8 9 9 10 11 12 13 14-15 Packing contents for Calios A1/Calios Condition on delivery Setting up/range Inserting the battery in the handset Connecting the base station (Calios A1) Connecting the base station (Calios) Connecting additional handsets (accessories) Battery Safety notes for the battery 16-19 16 17 18 19 20-28 2 INFORMATION Preface Application information Safety information Environment Packaging Batteries The pr
CONTENTS _____________________________ 29-36 29 30-33 34 35 35 36 37-41 37 38 39 39 40 40 41 42-52 42 43 43-44 45 46 47-49 50-51 52 53 53 53 54-58 54 55 56-58 58 59-60 59 60 Switching the microphone on and off Adjusting the volume CONVENIENCE FUNCTIONS Menu navigation Telephone book Alarm function Speed dialling Recording calls (Calios A1 only) Room monitor SMS FUNCTIONS Selecting the SMS menu Writing and sending an SMS SMS inbox The »Draft« menu The »Outbox« menu The »SMS Center« menu Partially de
CONTENTS _____________________________ 61-68 61 61 62-64 64 65 66-67 67 68 69 4 SETTINGS Setting the date and time Setting the menu language Sound settings Dimmer mode Setting the background image and contrast Locking the settings (PIN) Recording a call directly Restoring the settings (Reset) TECHNICAL DATA
INFORMATION _______________________ Preface Dear customer, congratulations on buying your Grundig DECT telephone and thank you for placing your confidence in us. This device has been manufactured with the utmost care. If you should have difficulties in operating it, we recommend that you consult this user manual. You can find more information on our website at: http://www.grundig-dect.
INFORMATION _______________________ To avoid damaging the handset, only use the rechargeable battery supplied. The used battery must be disposed of in line with the recycling regulations in this user manual. Your DECT telephone has a range of approx. 50 metres indoors and up to 300 metres outdoors. The range can be affected by the proximity of metal objects, such as a television and electrical devices.
INFORMATION _______________________ Environment Environmental protection and sustainable development is an important priority for Sagem Communication. Sagem Communication has a policy of using environmentally-friendly systems and makes environmental protection an essential part of the life-cycle of its products – from the manufacturing, to the installation, operation and disposal.
INITIAL SETUP ________________________ Packing contents Calios A1/Calios Base station Handset 1 battery (Li-ion type, 3.
INITIAL SETUP ________________________ Setting up/range Place the base station somewhere central and easily accessible where you want to use it. Depending on the ambient conditions, the range can be up to approx. 300 metres outdoors. It has a range of up to 50 metres indoors depending on the space and structure of the building. The structure of the building can cause signal shadows to occur. This can lead to short interruptions when speaking due to the weak signal.
INITIAL SETUP ________________________ Connecting the base station (Calios A1) Telephone socket Power supply unit Connecting cable for the telephone socket Connecting the power cord to the telephone socket 1 Plug the RJ connector of the power cord into the » « socket until it catches, on the back of the base station. 2 Connect the plug on the power cord into the telephone socket. Note: To detach the RJ connector, press the snap-in hooks down and pull it out.
INITIAL SETUP ________________________ Connecting the base station (Calios) Telephone socket Power supply unit Connecting cable for the telephone socket Connecting the power cord to the telephone socket 1 Plug the RJ connector of the power cord into the » « socket until it catches, on the back of the base station. 2 Connect the plug on the power cord into the telephone socket. Note: To detach the RJ connector, press the snap-in hooks down and pull it out.
INITIAL SETUP ________________________ Connecting additional handsets (accessories) Only use the power supply unit supplied. 1 Plug the power supply unit into the socket until it catches, on the back of the charging station. 2 Plug the power supply unit into the 230 volt socket.
INITIAL SETUP ________________________ Battery Charging the battery Before you can use your telephone, the battery must be charged. Put the handset into the cradle of the base station or charger (accessories) with the keypad facing forwards. When the battery is flat, »Ä« flashes in the handset display. It has a charging cycle from 12 to 15 hours. Charging status of the battery The charging status of the battery appears in the display.
INITIAL SETUP ________________________ Safety notes for the battery Read the safety notes on the battery before use. Inappropriate handling of the battery can cause overheating, fire, faults, loss of power and also serious injury. 14 7 Do not expose the battery to fire or heat. Do not store the battery in hot places. 7 Be careful not to mix up the polarities (+ and –) when inserting the battery in the handset.
INITIAL SETUP ________________________ 7 Do not leave the battery in the handset if there is an unusual smell, it is overheating, the colour or shape has changed, it is leaking or you notice any other unusual occurrences. 7 If the handset is to be used by children, make sure they are aware of how to use it safely and remind them to use the handset properly at all times.
OVERVIEW ____________________________ Handset Left function buttons, main redialling functions. Central function buttons, main telephone book functions. Right function buttons, selects the main functions in the main menu. (The assigned functions are in the display above the buttons.) Ŀ ĭ K ŀ R Opens the call list, scrolls upwards. Opens the call list, scrolls downwards. Establishes and ends the connection. Exits the menu. Press and hold down to switch the handset off and on again.
OVERVIEW ____________________________ Base station (Calios A1) z Adjusts the base station volume. Briefly press to get the ring tune for 30 seconds for all the registered handsets. Press and hold down for more than five seconds and the LED indicator flashes quickly to show the base station is ready to be registered. • Display lights up when the handset is ready. 5 Plays the recorded message, finds the beginning of the current message, finds the previous message.
OVERVIEW ____________________________ Base station (Calios) Briefly press to get the ring tune for 30 seconds for all the registered handsets. Press and hold down for more than five seconds and the LED indicator flashes quickly to show the base station is ready to be registered. 18 • Display lights up when the handset is ready. SIM Slot for a SIM card.
OVERVIEW ____________________________ Display – icons and their meanings III Center 1 23.11 d Symbols flash if the handset is not within the range of the base station or if it is searching for a base station. 11:22 D Signal strength. Symbols are visible if the handset is within range of the base station. Menu Ä Charging status of the battery. CENTER 1 Name and number of the handset. 13.09 13:50 Date and time. d Current functions for the left function buttons – redial.
TELEPHONING _______________________ Dialling with the number buttons 1 Enter the telephone number using »1...0 «. – The telephone number is ready to be connected for approx. 60 seconds. Notes: The display lighting switches on automatically after pressing the first button and switches off again 20 seconds after pressing the last button. If you press a wrong number button, you can delete it by pressing » « step-by-step. ŀ 2 Press » K « or » « to establish a connection. – The number is called.
TELEPHONING _______________________ Speed dialling The number buttons 2, 3 to 9 and 0 can be occupied with phone numbers. You can find out how to enter names and numbers for speed dialling in the section on “Convenience functions” on page 35. 1 To open the speed dialling number, press and hold down »2« to »0«. ŀ 2 Press » K « or » « to establish a connection. – The number is called. 3 Press » K « to end the call. Dialling from the telephone book In its original state the telephone book is empty.
TELEPHONING _______________________ Dialling from the call log When a call also transfers the phone number, it places the number in the call log regardless of whether you take the call or not. If you have a phone with an answering machine (Calios A1), the messages are also listed. A maximum of 30 entries can be stored in the call log. Each entry consists of the name (12 characters maximum) and the number (24 digits maximum) as well as the date and the time. 1 Open the call log with »ĭ«.
TELEPHONING _______________________ Using the call log You can set the call log so that all the calls or missed calls are displayed. 1 Open the menu by pressing the »Menu« function button on the right. Handset Set. Base Set. Base Set. Change PIN Remove HS Default BS Flash Time Pause Time Call Log ŀ 2 Select »Settings« with »Ŀ«, »ĭ«, » « or »R« activate with the »OK« function button on the right. 3 Select »Base Set« with »ĭ« or »Ŀ« and press the »OK« function button on the right to activate.
TELEPHONING _______________________ Accepting a call You can recognise an incoming call by a ring tone on the handset. The blue ring around the cursor buttons flashes. You can set the volume and melody of the ring tone. See the section on “Settings” on page 62. The phone number is displayed for a call which has transferred the phone number. If there is already a name in the phone book for the number displayed, it will appear. 1 Remove the handset from the base station.
TELEPHONING _______________________ Calling back if busy If the number of the caller is busy, you can activate the redial. When the line is free, your handset gives a ring tone. 1 Remove the handset from the base station. – The call is received automatically, or press » K « if the handset is not in the base station. Activating the redial When you hear the busy tone ...
TELEPHONING _______________________ or press the »Option« function button on the left, select the »Reject« function and confirm by pressing the »OK« function button on the right. – The second call is refused and the caller gets a busy tone. Making a second call While you are calling an external caller, you can also make a second external call. 1 Accept an external call by pressing » K «. – You are now connected to the external caller.
TELEPHONING _______________________ or press the »Option« function button on the left, select the »End second connection« function and activate by pressing the »OK« function button on the right. 4 Press » K « to end the call. Conference calls You can speak to two callers at the same time. 1 Accept an external call by pressing » K «. – You are now connected to the external caller.
TELEPHONING _______________________ Switching the keypad lock on and off You can protect the keypad on the handset from being inadvertently pressed. Switching on the keypad lock 1 In the idle mode, press » g « until the » appears. – The keypad on the handset is locked. « icon Note: You can still accept an incoming call. Switching off the keypad lock 1 In the idle mode, press and hold down » g « again.
CONVENIENCE FUNCTIONS __ Menu navigation Phonebook Telefonbuch The menu You can get an overview of all the different menus at the touch of a button. There is a complete overview of the menu structure and settings in the section on “The menu” on pages 63 and 67. OK Using the menu and buttons Open the menu with the »Menu« function button on the right. You can then see the menu items in the display. Use the »Ŀ«, »ĭ«, » « or »R« cursor buttons to select the menu items.
CONVENIENCE FUNCTIONS __ Telephone book You can enter names and numbers in the phone book and then dial directly from it. The phone book contains enough space for about 255 entries, depending on the number of characters (maximum of 12 for the name) and digits (maximum of 25 for the phone number). Once the memory for the phone book is full up, you will hear an alert tone when trying to enter another name and number and »Function not possible« appears in the display.
CONVENIENCE FUNCTIONS __ Phonebook New Entry View Entry Edit Entry Delete Entry Delete All PB Transfer Edit Entry Enter Name XXXX XXXXX_ Enter Number Changing an entry in the telephone book 1 Open the phone book with » «. – The first entry appears. 2 Select the entry to be changed with »ĭ« or »Ŀ« and confirm with the »OK« function button on the right. 3 Press the »Option« function button on the right, press »ĭ« or »Ŀ« to select »Edit Entry« and confirm with the »OK« function button on the right.
CONVENIENCE FUNCTIONS __ Phonebook New Entry View Entry Edit Entry Delete Entry Delete All PB Transfer Copying the telephone book from one handset to another 1 Open the phone book on handset 1 with » «. – The first entry appears. 2 Press the »Option« function button on the right, press »ĭ« or »Ŀ« to select »PB transfer« and confirm with the »OK« function button on the right.
CONVENIENCE FUNCTIONS __ Phonebook New Entry View Entry Edit Entry Delete Entry Delete All PB Transfer Deleting entries from the telephone book 1 Open the phone book with » «. – The first entry appears. 2 Select the entry to be deleted with »ĭ« or »Ŀ« and confirm with the »OK« function button on the right. 3 Press the »Option« function button on the right, press »ĭ« or »Ŀ« to select »Delete Entry« and confirm with the »OK« function button on the right.
CONVENIENCE FUNCTIONS __ Alarm function You can use your handset as an alarm clock. To set the time and the date, see the section on “Settings, setting the time and date” on page 61. 1 Open the menu by pressing the »Menu« function button on the right. 2 Select the »Alarm/Clock« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
CONVENIENCE FUNCTIONS __ Speed dialling You can programme a telephone number in the »1...0« number buttons. Edit Entry Delete Entry Delete All PB Transfer Quick Dial Copy from SIM Quick Dial Enter Number _ (1 – 9) Entering the speed dialling number 1 Open the phone book with » «. – The first entry appears. 2 Press »ĭ« or »Ŀ« to select the entry to be stored on the speed dialling button.
CONVENIENCE FUNCTIONS __ Room monitor You can use your handset as a room monitor. If the noise in the room exceeds a certain level, the handset automatically calls a second handset. When the room monitor function is switched on, no calls will be indicated on the handset. Calls made while the room monitor is switched on will be automatically ended after two minutes. Note: This function is only an additional monitoring aid. It should never be relied on as monitoring equipment for medical purposes.
SMS FUNCTIONS ____________________ You can send and receive text messages on the base station (SMS – Short Message Service) from all the registered handsets. If you have several handsets in use, only one handset can use the SMS function at any one time. The blue ring round the cursor buttons flashes when there is an incoming SMS. One SMS can contain up to 640 letters/characters. Text messages are passed on by service providers via SMS centres. Your handset has phone numbers for two SMS centres.
SMS FUNCTIONS ____________________ Writing and sending an SMS 1 Open the menu by pressing the »Menu« function button on the right. SMS Write Inbox 00/00 Draft 00 Outbox 00 Service Center Write XXXX XXXXX XX 00/00 ŀ 2 Select the »SMS« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right. 3 Select »Write« with »ĭ« or »Ŀ« and press the »OK« function button on the right to activate. 4 Type the message with the »1...0 « number buttons.
SMS FUNCTIONS ____________________ SMS inbox In the »Inbox« menu, you can read received messages, reply to a message, forward a message, save the sender’s phone number in the phone book and delete individual messages or all of them. 1 Open the menu by pressing the »Menu« function button on the right. SMS Write Inbox 00/00 Draft 00 Outbox 00 Service Center 00/00 ŀ 2 Select the »SMS« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
SMS FUNCTIONS ____________________ The »Outbox« menu In the »Outbox« you can read your message, change messages, send the message again, save the message in the draft folder or delete individual or all the messages. 1 Open the menu by pressing the »Menu« function button on the right. SMS Write Inbox 00/00 Draft 03 Outbox 00 Service Center 00/00 ŀ 2 Select the »SMS« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
SMS FUNCTIONS ____________________ Partially deleting the SMS memory (Auto-Delete) When this function is activated, the oldest SMS messages in all the SMS folders (inbox, outbox, draft) are automatically deleted. This makes more space for new messages. When this function is switched off, all the messages are kept and the device lets you know when the memory is full. 1 Open the menu by pressing the »Menu« function button on the right. Settings Handset Set. Base Set. Base Set.
ANSWERING MACHINE _________ Note: The answering machine functions can only be carried out with the Calios A1 model. Switching the answering machine on and off The answering machine is switched on in its original condition. On the base station 1 Press and hold down » Ǽ« on the base station to switch on the answering machine. – You will hear a message, display on the base station: » A o «. 2 Press and hold down » Ǽ« on the base station to switch off the answering machine.
ANSWERING MACHINE _________ Activating the message or announcement service A message and an announcement are already set by default. The message with a message recording (activated in original condition): “There is no one available to take your call at the moment. You can leave a message after the tone”. The announcement without the message recording: “There is no one available to take your call at the moment. Please call back later”.
ANSWERING MACHINE _________ Select OGM01 OGM02 4 Select »Record« with »ĭ« or »Ŀ« and press the »OK« function button on the right to activate. 5 Select »OGM01« or »OGM02« with »ĭ« or »Ŀ« and press the »OK« function button on the right to activate. – You will hear an acknowledgement tone, display: »OGM«. 6 After the tone, say your message or announcement. Note: You have 60 seconds for your message. If you exceed the recording time, you will hear a tone. Repeat your recording.
ANSWERING MACHINE _________ Screening messages When new messages are in the inbox, the handset display and the base station display show the blue ring flashing around the cursor button. Settings Record Memo OGM TAM On/Off Remote Control Remote Control Skip Forward Delete message Skip Back Repeat message Call Back Delete all Msgs ŀ 2 Select the »TAM« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
ANSWERING MACHINE _________ Deleting messages TAM Message ICM Settings Record Memo OGM TAM On/Off Remote Control Remote Control Skip Forward Delete message Skip Back Repeat message Call Back Delete all Msgs Deleting messages with the handset 1 Open the menu by pressing the »Menu« function button on the right. ŀ 2 Select the »TAM« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
ANSWERING MACHINE _________ Settings for the answering machine mode Length of messages You can specify the length of a message. You can choose a recording of 60 seconds, 120 seconds or unlimited. 1 Open the menu by pressing the »Menu« function button on the right. TAM Message ICM ŀ 2 Select the »TAM« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
ANSWERING MACHINE _________ Ringer selection (ring tones) You can set the number of rings after which the answering machine comes on. Select one of the rings from 2 to 9 and the “Automatic” setting. The “Automatic” setting allows you to check the answering machine for new messages quickly and free of charge from another location. If there are new messages, the answering machine comes on after two rings. If there are no new messages, the answering machine comes on after four rings.
ANSWERING MACHINE _________ Screening calls When this function is activated, you can listen to the message being recorded and then decide if you want to take the call. If you take the call, the answering machine stops recording. 1 Open the menu by pressing the »Menu« function button on the right. TAM Message ICM ŀ 2 Select the »TAM« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
ANSWERING MACHINE _________ Remote message enquiry The answering machine can be checked and operated from an external telehone. However, you can only do this if the answering machine is switched on and the “Remote control” function is activated. If you want to delete a message from a remote location, the “Delete by remote” function must be activated (see section on “Settings for remote enquiry” on page 52).
ANSWERING MACHINE _________ Remote enquiry functions ... Playing back messages and memos Number buttons Function Play all messages 2 * 2 Play new message(s) only, repeat playback. 5 Pause playback 2 Start playback 55 Stop playback 1 Go to the beginning of the current message 11 Play previous message 3 Play next message 02 Deletes the current message during playback, deletes all the messages you have listened to. ...
ANSWERING MACHINE _________ Remote message enquiry settings Recording length You can specify the length of a message. You can choose a recording of 60 seconds, 120 seconds or unlimited. 1 Open the menu by pressing the »Menu« function button on the right. TAM Message ICM ŀ 2 Select the »TAM« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
VOICE MAILS __________________________ Recording voice mails TAM Message ICM Settings Record Memo OGM TAM On/Off Remote Control (Calios A1 only) 1 Open the menu by pressing the »Menu« function button on the right. ŀ 2 Select the »TAM« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right. 3 Select »Record Memo« with »ĭ« or »Ŀ« and press the »OK« function button on the right to activate. 4 Dictate your voice mail.
ADDITIONAL HANDSETS ________ You can operate up to five handsets on your base station. If there are five handsets connected to the base station, there can be an external call and two internal calls carried out at the same time. Registering new handsets (accessories) at the base station Each additional handset must be registered on at the base station. Note: There cannot be a handset at the base station. 1 Open the menu by pressing the »Menu« function button on the right.
ADDITIONAL HANDSETS ________ Assigning personal names to a handset You can have a separate name for each handset. 1 Open the menu by pressing the »Menu« function button on the right. ŀ 2 Select »Settings« with »Ŀ«, »ĭ«, » « or »R« activate with the »OK« function button on the right. Settings Handset Set. 3 Select »Handset Set.« with »Ŀ« or »ĭ« and press the »OK« function button on the right to activate. Handset Set. Aut. Rufannah.
ADDITIONAL HANDSETS ________ Special features for using several handsets Calling from one handset to another – internal calls You can make internal calls free of charge. 1 On the first handset, press and hold down »# INT.«. – Display: »Internal Call« and the number (1-5) of the available handset. 2 Select the handset with »1« to »5«. 3 On the second handset, accept the call with » K «. 4 Press » K « to end the call, or replace the handset in the base station.
ADDITIONAL HANDSETS ________ Conference calls During an internal call, you can include an external caller in the call. 1 An external call is indicated as a“Call waiting” tone. – The external number appears in the display if it has been transferred and the CLIP function is activated. 2 Accept an external call by pressing » K «. – You are now connected to the external caller and the internal call is on hold.
ADDITIONAL HANDSETS ________ Brokering (internal) During an external call, you can make a second call from your handset to another handset without ending the external call. 1 An external call is indicated as a “Call waiting” tone. – The external number appears in the display if it has been transferred and the CLIP function is activated. 2 Accept an external call by pressing » K «. – You are now connected to the external caller and the internal call is on hold.
TELECOMMUNICATION SYSTEM OPERATION______________ Setting the flash time Note: You can only make the settings on the base station once you have entered your PIN number. 1 Open the menu by pressing the »Menu« function button on the right. Base Set. Base Set. Change PIN Remove HS Default BS Flash Time Pause Time Call Log ŀ 2 Select »Settings« with »Ŀ«, »ĭ«, » « or »R« activate with the »OK« function button on the right.
TELECOMMUNICATION SYSTEM OPERATION______________ Entering the external access code and dialling pause The external access code (often “0”) can be saved in the memory (redial/phone book/call log) to give you direct access to an external number. As the access code is automatically used every time a number is dialled, calling within the internal system is only possible if the system recognises that the number is internal by means of a special button (»g«, »h« or »R«).
SETTINGS ________________________________ Setting the date and time 1 Open the menu by pressing the »Menu« function button on the right. 2 Select the »Alarm/Clock« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right. ŀ Alarm/Clock Clock Setting Alarm Setting 3 Select »Clock Setting« with »Ŀ« or »ĭ« and press the »OK« function button on the right to activate. Clock Setting 4 Enter the time in four-digits by pressing »1...0«.
SETTINGS ________________________________ Sound settings You can assign internal and external calls with a different ring tune. You can also use this to tell the difference between the additional handsets. Setting the handset volume You can set the earpiece volume and the volume of the handset (speaker phone) separately. Sound Setting Handset Volume HS Ring Internal Ring BS Ring Tone 1 Open the menu by pressing the »Menu« function button on the right.
SETTINGS ________________________________ Sound Setting Handset Volume HS Ring Internal Ring BS Ring Tone Setting the handset tone and melody for internal calls 1 Open the menu by pressing the »Menu« function button on the right. 2 Select the »Sound Setting« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right. ŀ 3 Select »Internal Ring« with »ĭ« or »Ŀ« and press the »OK« function button on the right to activate.
SETTINGS ________________________________ Information tone Information tones tell you about the condition of your handset, such as when the battery is flat or the reception is weak, etc. You can switch the tones on and off. 1 Open the menu by pressing the »Menu« function button on the right. Sound Setting Handset Volume 2 Select the »Sound Setting« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
SETTINGS ________________________________ Setting the background image and contrast You can set the background image for the display and the display contrast. Display Wallpaper Contrast Setting the background image of the display 1 Open the menu by pressing the »Menu« function button on the right. ŀ 2 Select the »Display« menu item with »Ŀ«, »ĭ«, » « or »R« and activate with the »OK« function button on the right.
SETTINGS ________________________________ Locking the settings (PIN) You can enter a PIN number to protect the settings from unauthorised access. The default PIN is 0000. A PIN number is always needed to access the answering machine by remote enquiry. Note: Make sure you remember your new PIN. If you have forgotten your PIN, contact the hotline, see page 70. Entering a new PIN 1 Open the menu by pressing the »Menu« function button on the right. Settings Handset Set. Base Set. Base Set.
SETTINGS ________________________________ 4 Select »Change PIN« with »Ŀ« or »ĭ« and press the »OK« function button on the right to activate. 5 Enter the PIN »0000« with »1...0« and confirm with the »OK« function button on the right. Change PIN 6 Enter the new PIN in four-digits with »1...0« and confirm with the »OK« function button on the right. Enter new PIN ____ Note: If you make an error, you can delete the last letter with the »➔« function button on the left. 7 Repeat the entry with »1...
SETTINGS ________________________________ Restoring the settings (Reset) You can restore all the settings and entries in the phone book and call list with the reset function. Restoring handset settings 1 Open the menu by pressing the »Menu« function button on the right. ŀ 2 Select »Settings« with »Ŀ«, »ĭ«, » « or »R« activate with the »OK« function button on the right. Settings Handset Set. 3 Select »Handset Set.« with »Ŀ« or »ĭ« and press the »OK« function button on the right to activate. Base Set.
TECHNICAL DATA __________________ Standard DECT, GAP Frequency range 1880-1900 MHz Transmission channels 120 Medium output approx. 10 mW Range up to 300 m outdoors up to 50 m indoors Calios A1 Battery Power supply 230 V, 50 Hz, 40 mA Power supply 230 V, 50 Hz, 30mA Li-ion type, 3.
Grundig Multimedia B.V. http://www.grundig-dect.
