Operation Manual

14
ENGLISH
Preparation
1 Remove all packaging and sticker materials
and dispose of them according to the applica-
ble legal regulations.
2 Before using the appliance for the first time,
clean parts which come into contact with food
(see the “Cleaning and care” section).
3 Cut the food into small pieces before process-
ing with the appliance.
Maximum quantities and
processing time
Ingredients
Maximum
quantities
Processing time
Meat/Fish 200g 10-15 seconds
Herbs 20g 20 seconds
Nuts 200g 15 seconds
Cheese 150g 15 seconds
Bread 1 slice 20 seconds
Eggs
(hard-boiled)
2 eggs 5 seconds
Onions
(cut in 8 pieces)
100 g 10 seconds
Blending
1 Put the food that you would like to puree or
mix in the measuring beaker
M
or a similar
bowl.
2 Attach the blending attachment
G
to the
motor unit
E
by pushing the attachment to
the motor until it locks. Make sure the blend-
ing attachment is properly attached to the
motor unit.
3 Insert the plug into the wall socket.
4 Immerse the blending attachment
G
in the
measuring beaker
M
, that contains the ingre-
dients to be blended.
Note
7
To prevent the ingredients from splashing,
do not press the On/Off button
C
or turbo
button
D
until the blending attachment has
been immersed in the ingredients.
5 Press and hold down the On/Off button
C
.
― The appliance starts operating.
6 Use the speed control
B
to select a speed or
press and hold the turbo button
D
.
― The speed indicator LED
A
illuminates
according to the desired speed 1-6.
Notes
7
When you use the turbo button the appliance
operates at maximum speed. In this case you
cannot adjust the speed with the speed con-
trol
B
.
7
While using the turbo button
D
, all speed
indicator LEDs illuminate.
7 Move the appliance slowly up and down and
in circles to blend the ingredients.
Note
7
Always switch off the appliance before taking
out the processed food.
8 Release the On/Off button
C
or turbo button
D
when you are finished and disconnect the
power plug from the wall socket. Remove the
mixture from the measuring beaker
M
.
9 Disassemble the blending attachment
G
only
by pushing the attachment release buttons
F
at the sides of the appliance and pulling it off
from the motor unit.
Notes
7
To prevent overheating do not operate the
appliance continuously for more than 10
seconds.
7
Never switch on the appliance for longer than
necessary for processing the food.
7
To prevent overflowing of the mixture do not
overfill the measuring beaker
M
or bowl.
Smaller amounts are easier to process.
OPERATION _________________________________