AWdKvCa n3 c7e0 5C CR D S SECURITY CODE
Contents Please note Operating Instructions Advance CC 3 Identity Card .................................... 3 Theft protection................................. 3 Attention with automatic aerials ............. 3 Installing the car radio ........................ 4 Removing the control panel .................. 4 Refitting the control panel .................... 4 Traffic safety .................................... 4 GRUNDIG environment initiative ............ 4 Switching on and off ...........................
Contents Compact Disc (CD) 19 Selecting the CD programme source ...... 19 Switching the display ........................ 19 Selecting a CD................................. 19 Selecting or repeating a track .............. 19 Fast forward and reverse .................... 19 Playing the 1st track on every CD for approx. 10 secs. (CD SCAN) ................ 19 Playing the tracks on a CD in random order (TRACK RANDOM) ..................... 19 Traffic announcements....................... 20 Ending CD play ......
Please note Identity Card The identity card for your car radio contains the type, the serial number and the code number for coding. ǵ Removing the control panel In addition to activating coding, you can remove the control panel of the car radio and take it with you. This renders the car radio worthless to thieves. Theft protection Code label DOUBLE SECURITY SYSTEM Model Type CODE Serial No. Code No.
Please note Installing the car radio Refitting the control panel These operating instructions assume that the car radio has correctly been installed and connected by a specialised dealer. í Before making a drive please familiarise yourself with the various functions of your car radio. í Volume Information about installing the car radio are to be found at the end of this booklet. Removing the control panel Traffic safety Operating your radio at high volume while driving can endanger you and others.
Please note Switching on and off Phone mode with a car telephone – on the car radio Press the ¢ rotary knob. Your car radio is provided with a connector for a car telephone or CB radio. – with the ignition /starter switch of the car, if the car radio was previously switched off using the ignition/starter switch. Mute When operating the car telephone or CB radio, the car radio is muted. Switching on for 1 hour max. ...
Brief Operating Instructions Progamme sources Amplifier Using the ¢ rotary knob, you can switch the car radio on and off, alter the volume, and carry out fader, balance, bass, treble, and EXPERT settings. To select the second function (fader or balance), press the corresponding button twice. The currently selected function of the ¢ rotary knob is indicated in the display.
Display 1…5 NEWS … Radio AM DX LRN Medium and long wave. Max. search sensitivity. RDS programmes are stored in the LEARN memory. RDS SCAN LEARN memory: manual tuning to RDS programmes. AUTOSCAN LEARN memory: automatic tuning to RDS programmes. MUSIC Setting for Audio Sound Processing DX 8 U AF TP ɳ ǵ LOUD Cassette TAPE 1 TAPE 2 APF APF 4 APF 6 MUSIC – 88888888 ɳ ij U III DAB AF TP 2 SPORT 1 NEWS LOUD APF 3 POP 4 CLASS DX 8 CR Upper cassette side. Bottom cassette side.
Amplifier Switching on and off on the car radio Briefly press the ¢ rotary knob. Volume Turn the ¢ rotary knob. The display indicates: "VOL 00" … "VOL 46" LOUD (loudness) ASP (Audio Sound Processing) Using the Audio Sound Processing system, you have the choice between various space sound effects. The first four station buttons are allocated to the sound effects ”MOVIE”, ”DISCO”, ”VOICE”, and ”MUSIC”. Pressing the station button 5 exits the ASP function. The display indicates ”ASP OFF”.
Amplifier BASS TRE (Treble) “ TRE Tone memory “ BA FAD Briefly press the BAL button. Turn the ¢ rotary knob. The display indicates: "TREB - 14"…"TREB 00"…"TREB + 14" Briefly press the button. Turn the ¢ rotary knob: The display indicates: "BASS - 8"…"BASS 00"…"BASS + 8" Terminate the setting: Terminate the setting: “ TRE BAL “ BA FAD Briefly press the button two times, or automatically after approx. 10 seconds. Briefly press the button two times, or automatically after approx. 10 seconds.
Amplifier Overload protection Radio Selecting the RADIO programme source At high ambient temperature and volume, the overload protection circuit may respond. As long as the overload is not removed, the rear output stages of the amplifier are switched off. In cassette or CD mode: briefly press the RADIO button. ¡ Stereo reception (VHF only) Range selection ¡ Repeatedly press the RADIO button. U ranges U l, U ll, U lll (FM): VHF 87.5 … 108.
Radio Setting RDS programmes with the LEARN memory With the push of a button you can store up to 24 RDS programmes in the LEARN memory! You can call up the stored RDS programmes manually (RDS-SCAN) or automatically (AUTOSCAN) one after the other. Allocating the LEARN memory Ranges: U I, U II or U III. Briefly press the LRN/AS button: RDS programmes (max. 24) being received in the reception area are stored in memory. "LRN ..." appears in the display .
Radio Manual frequency tuning 1. Select a range: U l, U ll, U lll, AM. 2. Press the < or > button until the 2nd signal sounds. The display indicates "MAN" and the frequency tuned to. 3. Tune to the desired frequency. Press the < or > button briefly (frequency steps) or a longer time (fast frequency scroll). The display indicates, for example, "MAN 92.70". 4. Terminate manual frequency tuning. Press the U III or RADIO or AF button. Station buttons 12345 Select a range: Ul, Ull, Ulll, AM.
Radio Alternative frequencies (AF) The display indicates " AF" You are receiving an RDS programme that is being broadcast by several stations with different frequencies. Switching off the AF function When you are in an area with very poor reception conditions it may happen that short pauses occur while the radio is searching for the alternative frequencies. It is best in this case to switch the AF function off. Press the AF button until the signal sounds. The "AF" function is switched off.
Radio AIM storage capacity – approx. 3 minutes ➭ page 23, EXPERT setting ´`. If the AIM memory is full the oldest traffic announcements will be deleted. AIM memory standby If the car radio is on the AIM memory standby is always on when – a traffic radio station is set; » TP « is shown in the display and the – AIM TP button is “activated”. ¡ If the car radio is off – AIM function (on) ➭ page 23: EXPERT setting .
Radio Programme types (PTY) Prerequisite The radio station tuned to must offer the "Programme types" service PTY in the VHF range. Programme types The programme types a radio station offers change according to the programme being broadcast. NEWS News and current events AFFAIRS Politics and current affairs INFO Special talk programme SPORT Sport programme EDUCATE Learning and continuing education DRAMA Radio plays and literature ROCK M Rock music M.O.R.
Radio PTY function 1. Activating the PTY function Press the PTY/DX button briefly: the last selected programme type is shown in the display. ¡ 2. Set the desired programme type … – with the PTY programme buttons NEWS, SPORT, POP, CLASSICS or PERS Press the respective button briefly: the PTY search starts automatically and moves to the next station offering the programme type selected. The display shows "PTY ..." Briefly press the < or > button until the desired programme type is shown in the display.
Cassette Cassettes are subjected to high temperatures during car radio operation. Therefore use only highquality heat-resistant C60 and C90 cassettes from name-brand manufacturers. Dolby noise reduction is manufactured under license from Dolby Laboratories Licensing Corporation. DOLBY and the Double D symbol are registered trademards of the Dolby Laboratories Licensing Corporation.
Cassette Skipping the currently played track: Briefly press the > button. The display indicates ” APF +1 ”. Skipping or repeating tracks APF = Automatic Program Finder Prerequisite are pauses of at least 3 seconds between music selections (without announcer text or the like). Not suited are music selections with very quiet passages (e.g., classical music) because such passages are treated as pauses. Skipping tracks, eg. 4 (max.
Compact Disc (CD) with "GRUNDIG CD Changer"* í On multimedia CDs, data tracks are recorded in addition to the sound tracks. If you play such a CD despite of the warning message, noise may be generated in a volume which can endanger traffic. In addition, the receiver’s output stages and the loudspeakers may be damaged. Selecting the CD programme source Press the ¡ button. CD The display indicates, for example: "CD 1 TO1": 1st CD - 1st track "TO1 O1: 15": 1st track - playing time of 1st track.
Compact Disc (CD) Traffic announcements í On multimedia CDs, data tracks are recorded in addition to the sound tracks. If you Ending CD mode Switching on AIM TP Hold down AIM TP button briefly » TP « appears in the display. Radio mode Switching off AIM TP Hold down AIM TP button briefly » TP « disappears from the display. briefly press one of the station buttons .
EXPERT Settings EXPERT 3. Activating the setting LOUD Briefly press the EXPERT button: "E" appears in the display Possible settings “ A great number of possible settings To make car radio operation as easy as possible, numerous settings that you need only once or occasionally are located in an additional control level (EXPERT). Setting 1. Activating the EXPERT function LOUD Press the EXPERT button until the signal sounds. “ 2.
EXPERT 6 AM ON The AM reception area (153 … 279 … 531 … 1602) is switched off by » AM OFF «. Then the Radio button has no function. 7 Auto LEARN (radio mode) If you are in a reception area where “RDS channels with traffic radio reports” cannot be received well, you can suppress the “Auto LEARN (LRN) during radio operation”. » LRN ON «: Auto LEARN » LRN OFF «: no Auto LEARN when volume is set higher than » VOL 4 «.
EXPERT Volume Speed dependent volume » SCVOL « (0 … 67) Setting is only possible if a speed dependent signal is emitted at the SCV connection (A1). » SCVOL - - - «: SCV switched off » SCVOL 0 67 «: Maximum effect ßE The resulting increase in volume is indicated by the left digit (or digits). For experts: Numerical value x 1.25 = volume increase in db (max. 20 db). Examples: » SCVOL 16* 67 « : Maximum set effect. Maximum volume increase » SCVOL 8* 67 « : Maximum set effect.
EXPERT ´W AIM TIMER 2 (switch-on time 2), ➭ page 13: AIM function. Current time is set: or ! » T 2 OFF « : TIMER 2 is off » T 2 23:59 «ɫ» T 2 OFF «ɫ» T 2 00:01 « Turn ¢ rotary knob quickly: quick change of the switch-on time. 1 2 ´E Current time automatic » SYNC ON «: If the radio is tuned to an “RDS channel with time synchronization”, the time is updated automatically. » SYNC OFF «: no time synchronization, time has to be set manually.
Coding Coding Your personal code number is on the identity card of your car radio. Coding is not activated when the radio leaves the factory. If you have “activated” your car radio's coding: As soon as you disconnect the car radio from the car battery (or permanent plus terminal 30), it is electronically blocked. Only you are able to put it back into operation by entering your personal Code Number.
Coding Return to operation The car radio is electronically disabled after it has been disconnected from the car battery (or permanent plus, terminal 30), e.g. after the radio has been removed during servicing. 1. Switch the car radio on: The display indicates "SAFE". After approx. seconds, it will indicate "I - - - -". 2. Enter the code number (on Identity Card), as described in the chapter "Activating coding". 3. Confirm the code number: LOUD Briefly press the EXPERT button.
Installation and Removal Supply voltages Blade contacts A: Figure + A8 – operating voltage (earth) Connect to terminal 31 (earth) of the vehicle. A7 +12 V operating voltage Connect to terminal 30 (permanent plus) of the vehicle. A6 Car radio illumination Connect the blade contact A6 to terminal 58 of the vehicle. When the vehicle's headlights are switched on, the illumination of of the car radio can be controlled. Blade contact A6 not connected: The car radio illumination cannot be changed.
Installation and Removal Aerial The car radio is designed for aerials with an impedance of 75Ω to 150Ω. Extended aerial cables, e.g. for aerials at the rear of the car, may impair reception. Figures p and ü – If necessary, use the aerial adapter (fig. p). – Fix the aerial adapter (fig. p) or aerial cable (fig. ü) in the plastic holder. Line output Connection for booster or active speaker.
Important Information Speed controlled volume SCV = Speed Controlled Volume The car radio is well-suited to most types of signal generators. Your vehicle dealer can inform you whether your vehicle is suitable for “speed-controlled volume regulation”. Conditions: A speed-controlled signal must be present at the SCV connection! In vehicles with an electronic speedometer, on-board computer, cruise controller etc., a signal generator is already present.
Advance CC
Advance CC 1 a b 2 3 5 c 4 1 4 C 3 6 2 5 B 13 16 19 15 18 11 17 20 1 3 5 7 2 4 6 8 5 7 6 8 1 A 10 9 12 2 4 T 10 A d
Ķ Im Falle eines Defektes ǵ Model Type Serial No. Code No. Die Identity Card dient als Eigentumsnachweis mit individuellem Sicherheitscode und erleichtert bei Verlust des Gerätes die Schadensabwicklung. Vor fremdem Zugriff schützen. The identity card serves as evidence of ownership with individual security code and facilitates the settlement in the case of theft of the unit. Keep the document safe.
0123456789 GRUNDIG AG . D-90762 Fürth Advance CC 18390-941.
