Operation Manual
Yourtelevisionisequippedwith
theDIGILINKfunction.
This function uses the CEC
(ConsumerElectronicsControl)
protocol.
CECallowsexternaldeviceswhichareconnect-
ed to the »« sockets by an HDMI cable
(e.g.DVDplayer)tobeoperatedwitharemote
control.
Prerequisiteisthatthedevicesconnectedsupport
CEC.Readtheoperatingmanualfortheexternal
devicetofindouthowtoactivatethecorrespond-
ingfunction.
Ifthe»Autom.switch-onTV«functionisactivated
(»On«), then once the external device (e.g.
DVDplayer)isswitchedon,thetelevisionalso
switchesonandtheappropriateHDMIpresetis
selected.
If your television is switched on and you then
switchontheexternaldevice(e.g.DVDplayer),
the appropriate HDMI preset on the television
willbeselected.
The television menu language is automatically
selectedontheexternaldevice(e.g.DVDplayer).
Theexternaldevicemustsupportthisfunction.
Ifyouswitchyourtelevisiontostandby,theex-
ternaldevice(if it is switched on)will also be
switchedtostandby.
DIGILINKisalwaysactiveonyourtelevisionset.
Youcanconnectupto11deviceswithDIGILINK
functionstoyourtelevision.
OpentheCECdevicelistwith»«.
–The»HDMICECDeviceList«appears.
Startthedevicesearchwith»
«(red).
–
Thedevicesfoundaredisplayedinthe
menu.
Select the device for operation with »
«,
»
«,»
«or»
«andpress»●«tomarkit.
–If the selected device is connected to a
differentinputtothecurrentone,aswitch
to the respective input will occur auto-
matically.
Press»«toendthesetting.