Operation Manual







Beforeconnectingthedatamedium,switchthe
television to standby using »
8«. Connect the
deviceandthenswitchthetelevisiononagain.
Before removing the external data medium,
thetelevisionsetmustbe switchedto standby,
sothatnodatalossoccurs.

7
The »« socket of the television set
supplies amaximumpowerof500mAin
accordancewithUSBspecifications.Exter-
nal hard disks which require more power
may therefore only be connected to the
»«ofthetelevisionset.
7
If you use a network cable for external
hard disks which are connected to the
» « socket on the television, this
network cable must also be disconnected
fromthepowersupplywhenthetelevision
isswitchedoff.
7
Externaldatamediamaynotbedisconnect-
edfromthetelevisionsetwhilefilesonthe
datamediumarebeingaccessed.
7
Abi-directionaldatatransferasdefinedfor
ITE (Information Technology Equipment)
devices in EN 55022/EN 55024 is not
possible.
7
USB transfer is not in itself an operating
mode.Itisonlyanadditionalfunction.
 Connectthe»«socketof the tel-
evision and the corresponding socket on
thedatadevice(externalharddrive,digital
camera,cardreaderorMP3player)usinga
USBcable;
 or
 InserttheUSBplugoftheUSBmemorystick
intothe»«socketofthetelevisionset.

Confirm the display » « with » «
(green).
 –Thefilebrowserappears.