Operation Manual






Therearetwowaysofmakingthewirelessnet-
worksettings.
 Automaticconnection,
 »ApartfromAccessPointSelection,alldata
regardingthe connectionsettings(»IPAd-
dress«,»Netmask«,»Gateway«and»DNS«)
areobtainedfrommodemautomatically.
 Manualconnection,
 allconnectionsettings(»IPAddress«,»Net-
mask«, »Gateway« and »DNS«) must be
configuredmanually.

MostofthehomenetworksareDynamic.Ifyou
havea dynamic network,you must usea DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »DNS«
valuesthatarerequiredfor»IPAddress«,»Net-
mask«, »Gateway« and internet access auto-
matically,andthusyouarenotrequiredtoenter
thosevaluesmanually.
 Openthemenuwith»«.
 Select»CONNECTEDAPPS«with»
 «or»  «
andconfirmwith»●«.Menuisdisplayed.
 Select»NetworkSettings«with»
 «or»  «
andconfirmwith»●«.
 –»NETWORKSETTINGS«menuisdisplayed.
 Select »Connection« with »
 « or »  «and
thenselect»Wireless«with»

«or»

«.
 Select»ConnectionType«with»
 «or»  «
and then select »Automatic« with »

« or
»

«.
 Select »Select Access Point« with »
 « or
»
 «andconfirmwith»●«.
 –»Select AccessPoint«menuappearsand
available wireless networks are scanned
anddisplayedinthemenu
 Selectthenetworkthatyouwanttoconnect
with»
 «,»  «,»

«or»

«andconfirmwith
»●«.
 –Wireless connection password screen is
displayed.
 Selecttherequiredcharacterwith»
 «,»  «,
»

«and»

«andmovetothenextcharacter
with»●«.
 –Select »« for uppercase and »«
forlowercaseandconfirmwith»●«.
 –Select»«fornumbersandsymbols
andconfirmwith»●«.
 –Enterthepassword,select»«with
»
 «, »  «, »

« or »

« and confirm with
»●«.
 Select»Connect«with»
«(red)toestablish
themodemconnection.
 –The mesage »Testing ... Please waite«
appears.
 Press »
« (green) to make sure that the
network connection is established with the
currentsettings.
 –The messages »Testing ... Please waite«
appears, after successfull announcement
the messages »Connecting To Gateway:
Successful« and then the MAC address
andtheIPAddress.
 Press»«toendthesetting.

7
If you do not have a dynamic network,
followtheinstructionsinmanualconnection
section.