Operation Manual






Youcanestablishawiredorwirelessconnection
betweenyourtelevisionandthelocalnetwork.

Connect the output of external modem to
»«socketwithCat5cable.

7
Connectioncablesarenotsupplied.

Therearetwowaysofmakingthewirednetwork
settings.
Automaticconnection,
alldataregardingtheconnectionsettings(»IP
Address«,»Netmask«,»Gateway«and»DNS«)
areobtainedfrommodemautomatically.
Manualconnection,
allconnectionsettings(»IPAddress«,»Net-
mask«, »Gateway« and »DN) must be
configuredmanually.

MostofthehomenetworksareDynamic.Ifyou
havea dynamic network,you must usea DSL
modem that supports DHCP. Modems and IP
sharers that support DHCP obtain the »DNS«
valuesthatarerequiredfor»IPAddress«,»Net-
mask«, »Gateway« and internet access auto-
matically,andthusyouarenotrequiredtoenter
thosevaluesmanually.

7
If you do not have a dynamic network,
followtheinstructionsinmanualconnection
section.
Openthemenuwith»«.
Select»CONNECTEDAPPS«with»
«or»
«
andconfirmwith»«.Menuisdisplayed.
Select»NetworkSettings«with»
«or»
«
andconfirmwith»«.
–»NETWORKSETTINGS«menuisdisplayed.
Select»Connection«with»
«or»
«and
thenselect»Wired«with»
«or»
«.
Select »Connection Type«with »
«or »
«
andthenselect»Automatic«with»
«or»
«.
Select»Connect«with»
«(red)toestablish
themodemconnection.
–The mesage »Testing ... Please waite«
appears.