Specification Sheet

Company name:
Created by:
Phone:
Date: 10/30/2020
Printed from Grundfos Product Center [2020.10.013]
Count Description
1 UPS 26-99 FC
Product photo could vary from the actual product
Product No.: 52722512
The pump is of the canned rotor type, i.e. pump
and motor form an integral unit without shaft
seal and with only two gaskets for sealing.
The bearings are lubricated by the pumped liquid.
The pump is characterized by:
* Ceramic shaft and radial bearings.
* Carbon axial bearing.
* Stainless steel rotor can and bearing plate.
Impeller: * Corrosion-resistant impeller, Composite, PES.
Pump housing: * Cast iron pump housing.
Phase: The motor is a 1-phase motor.
No additional motor protection is required.
Liquid:
Pumped liquid: Water
Liquid temperature range: 35.6 .. 230 °F
Selected liquid temperature: 140 °F
Density: 61.35 lb/ft³
Technical:
Approvals on nameplate: UL, CSA
Materials:
Pump housing: Cast iron
EN-JL1030
ASTM 30 B
Impeller: Composite, PES
Installation:
Maximum ambient temperature: 104 °F
Ambient max at 176°F liquid: 176 °F
Maximum operating pressure: 145.04 psi
Flange standard: USA Oval
Type of connection: C.I. Flange
Pipe connection: 2 - Bolt Flange
Pressure stage: PN 10
Port-to-port length: 6 1/2 in
Electrical data:
Power input in speed 1: 0.2012 HP
Power input in speed 2: 179 W
1/3

Summary of content (3 pages)