Submittal Sheet
Table Of Contents
- 1. Product description
- 2. Product range
- 3. System applications
- 4. Functions
- Control modes: Quick overview
- Operating modes
- Control modes
- Additional control mode features
- Multipump modes
- Flow estimation accuracy
- Readings on the pump
- Performance overview
- Operating status and pump performance
- Warning and alarm
- Heat energy monitor
- Heat consumption accuracy
- Operating log
- Help and guidance
- Grundfos Eye
- Communication
- Grundfos GO Remote
- Wireless GENIair
- CIM modules
- Available CIM modules
- Grundfos Remote Management
- Digital inputs
- Relay outputs
- Analog input for an external sensor
- External setpoint function
- 5. Operating conditions
- 6. Construction
- 7. Installation
- 8. Operating the product
- 9. Curve conditions
- 10. Performance curves and technical data
- Conversion tables
- MAGNA3 32-60 F (N)
- MAGNA3 32-100 F (N)
- MAGNA3 32-120 F (N)
- MAGNA3 40-80 F (N)
- MAGNA3 40-120 F (N)
- MAGNA3 40-180 F (N)
- MAGNA3 50-80 F (N)
- MAGNA3 50-120 F (N)
- MAGNA3 50-150 F (N)
- MAGNA3 50-180 F (N)
- MAGNA3 65-120 F (N)
- MAGNA3 65-150 F (N)
- MAGNA3 D 65-150 F
- MAGNA3 80-100 F (N)
- MAGNA3 D 80-100 F
- MAGNA3 100-120 F (N)
- MAGNA3 D 100-120 F
- 11. Accessories
- 12. Product numbers
- 13. Grundfos Product Center
Accessories
MAGNA3
11
63
11. Accessories
Insulating kits for applications with
ice buildup
The accessory is for single-head MAGNA pumps used
in applications with ice build-up.
The accessory set consists of two polyurethane (PUR)
shells and metal clamps to ensure tight assembly.
Fig. 59 Fitting the insulating shells to a MAGNA3 pump
Note: The dimensions of the insulating shells differ
from those of the insulating shells for heating systems.
You can use the insulating shells for both
stainless-steel and cast-iron pumps.
* If the control box of the pump is turned, the insulating shells are not
applicable. Please contact Grundfos.
Not all variants are available in all markets.
Specifications:
• Specific volume resistance greater than or equal to
10
15
Ωcm, DIN 60093
• thermal conductivity at 10 °C 0.036 W/mK and at 40
°C 0.039 W/mK, DIN 52612
• density 33 ± 5 kg/m
3
, ISO 845
• working temperature range -40/+90 °C, ISO 2796.
CIM modules
A CIM module is an add-on Communication Interface
Module. The CIM module enables data transmission
between the pump and an external system, for
example a BMS or SCADA system.
The CIM module communicates via fieldbus protocols.
The following CIM modules are available:
Note: Use booster functional profiles for twin-head
pumps.
For further information about data communication via
CIM modules, see the CIM documentation available in
Grundfos Product Center.
Location of CIM module
The CIM module is fitted behind the front cover. See
fig. 60.
Fig. 60 Location of CIM module
For installation instructions, please go to:
TM05 2874 0412
Pump type Product number
MAGNA3 25-40/60/80/100/120 (N) 98354534
MAGNA3 32-40/60/80/100/120 (N) 98354535
MAGNA3 32-40/60/80/100 F (N) 98354536
MAGNA3 32-120 F (N) 98063287
MAGNA3 40-40/60 F (N) 98354537
MAGNA3 40-80/100 F (N) 98063288
MAGNA3 40-120/150/180 F (N) 98145675
MAGNA3 50-40/60/80 F (N) 98063289
MAGNA3 50-100/120/150/180 F (N) 98145676
MAGNA3 65-40/60/80/100/120 F (N) 96913593
MAGNA3 65-150 F (N)* 99608813
MAGNA3 80-40/60/80/100/120 F* 98134265
MAGNA3 100-40/60/80/100/120 F* 96913589
Module Fieldbus protocol Product number
CIM 050 GENIbus 96824631
CIM 100 LonWorks 96824797
CIM 200 Modbus RTU 96824796
CIM 260 US 3G/4G cellular 99439306
CIM 280 GRM 3G/4G 99439724
CIM 300 BACnet MS/TP 96893770
CIM 500 Ethernet 98301408
TM05 291 4 1112
net.grundfos.com/qr/i/99332342