Submittal Sheet

Table Of Contents
Curve conditions
MAGNA3
9
43
9. Curve conditions
Performance curves
The guidelines below apply to the performance curves
on pages 45 to 62:
Test liquid: airless water.
The curves apply to a density of ρ = 983.2 kg/m
3
and a liquid temperature of 140 °F (60 °C).
All curves show average values. If a specific
minimum performance is required, individual
measurements must be made.
The curves apply to a kinematic viscosity of μ =
0.474 mm
2
/s (0.474 cSt).
Reference supply voltage: 1 x 230 V, 50 Hz.
Note: Within the MAGNA3 performance range, you
can set the constant- and proportional-pressure curves
in steps of 0.1 m head on the operating panel or with
Grundfos GO.
QR code on the pump nameplate
Fig. 58 QR code on the pump nameplate
With Grundfos GO or a smartphone, you get the
following information about MAGNA3:
product photo
pump performance curves
dimensional sketches
wiring diagram
quotation text
technical data
service parts list
PDF files, such as data booklet and installation and
operating instructions.
TM05 3826 2017