Submittal Sheet

Functions
MAGNA3
4
26
Operating log
The Operating log is the perfect tool for pump
optimization, replacement and fault finding as it offers
the following:
• All duty points and operating conditions are tracked
and stored in the pump.
• The 3D work log and duty curve (over time) provide
instant overviews of historical pump performance
and operating conditions.
Fig. 35 Example of Operating log
Help and guidance
The Assist menu guides you through the setup of the
pump and offers the following:
• step-by-step instructions in how to set the pump
• a short description of the six control modes and
recommended applications
• assistance with fault correction
• fault advice
• multipump setup
• setup, analog input
• description of control mode.
Grundfos Eye
Grundfos Eye at the top of the operating panel is a
pump status indicator light providing information about
the pump operating status.
The indicator light will flash in different sequences and
provide information about the following:
• power on or off
• pump warnings
• pump alarms
• remote control
• pump running or stopped.
The function of Grundfos Eye is described in detail in
the installation and operating instructions.
Fig. 36 Grundfos Eye
Communication
MAGNA3 enables communication via the following:
• wireless Grundfos GO
• fieldbus communication via CIM modules
• digital inputs
• relay outputs
• analog input.
Grundfos GO Remote
With Grundfos GO Remote, you can monitor your
pump, change settings, collect data and make reports.
A user-friendly interface provides you with all the
information and help you need, as well as live pump
data monitoring and easy-to-follow tips and guides.
For further details, see Grundfos GO Remote, page
64.
TM05 3810 1612