Product Overview

JP Jet Pumps
Domestic water supply
4
35
Operating conditions
Selection
Pumped liquids
JP pumps are suitable for pumping clean, non-viscous,
non-aggressive, non-explosive liquids, free of solid
particles or fibers.
Selection of pumps
Deep well ejectors
Installation
Pump location
The pump must be located in a well-ventilated place,
protected from unfavorable weather conditions and
with an environmental temperature not exceeding
104 °F (40 °C).
It is always good practice to place the pump as close
as possible to the liquid to be pumped.
Pump position
Allowable positions
Fig. 20 Pump must be installed in horizontal position only
The pump must be installed only in horizontal position.
To prevent movement and vibrations, anchor the pump
firmly to a horizontal surface.
Max. operating pressure: 116 psi (8 bar)
Liquid temp range: +32 °F to +95 °F (0 °C to +35 °C)
Max. relative humidity of air 95%
Storage temp range: +14 °F to +104 °F (-10 °C to 40 °C)
Shallow well - cast iron
Pump
type
Hp Ph
Volts
[V]
Pressure
switch
setting
[psi]
Product
number
JP05S-CI 1/2 1 115/230 30-50 97855073
JP07S-CI 3/4 1 115/230 30-50 97855081
JP10S-CI 1 1 115/230 30-50 97855085
JP15S-CI 1-1/2 1 230 40-60 97855091
JP20S-CI 2 1 230 40-60 97855094
JP30S-CI 3 1 230 40-60 97855095
Shallow well - stainless steel
Pump
type
Hp Ph
Volts
[V]
Pressure
switch
setting
[psi]
Product
number
JP05S-SS 1/2 1 115/230 30-50 97855075
JP07S-SS 3/4 1 115/230 30-50 97855083
JP10S-SS 1 1 115/230 30-50 97855088
Deep well - cast iron*
Pump
type
Hp Ph
Volts
[V]
Pressure
switch
setting
[psi]
Product
number
JP05D-CI 1/2 1 115/230 30-50 97855072
JP07D-CI 3/4 1 115/230 30-50 97855080
JP015D-CI 1-1/2 1 230V 40-60 97855090
JP020D-CI 2 1 230V 40-60 97855093
* Ejector not included
Type
Product
number
E20 NPT 96654382
E25 NPT 96654383
E30 NPT 96654384
TM05 1232 2411