Product Overview

TPE Series 2000 pumps
TPE E-circulators
8
16
Overview of functions
E-pump functions TPE Series 2000 with single-phase MLE
Setting via control panel:
Setpoint z
Start/stop z
Max. curve z
Min. curve z
Alarm reset z
Constant/proportional pressure z
Reading via control panel:
Setpoint z
Operating indication z
Fault indication z
Setting via R100:
Setpoint z
Start/stop z
Max. curve z
Min. curve z
Alarm reset z
Controlled/uncontrolled
Constant/proportional pressure, constant curve
Controller constants Kp, Ti
External setpoint signal z
Signal relay function
Pump number (for bus communication) z
Stop function
Sensor range and signal
Duty/standby
Operating range (min./max. speed)
Reading via R100:
Setpoint z
Operating mode z
Actual sensor value z
Pump speed z
Actual power consumption z
Energy consumption z
Running hours z
Setting via GENIbus:
Setpoint z
Start/stop z
Max. curve z
Min. curve z
Controlled/uncontrolled
Constant/proportional pressure, constant curve
Reading via GENIbus:
Setpoint z
Operating indication z
Pump status z
Additional functions:
Parallel operation z
Clock program z
Settings via external signal:
Setpoint z
Start/stop z
Min./max. curve via digital input z
Min./max. curve, external fault, Flow switch via digital input z
Readings via external signal:
Fault signal (relay) z
Fault, Operation or Ready signal (relay)
zAvailable