Install Instructions

English (US)
4
4.1 Delivery and handling
4.1.1 Delivery
Examine the pump carefully to make sure no damage has
occurred during shipment.
Fig. 1 CMBE
4.1.2 Handling
The packing is specially designed to protect it from damage.
During unpacking and prior to installation, make sure that the
pump is not dropped or mishandled.
4.2 Applications
The CMBE is designed for domestic and commercial constant
pressure applications.
4.2.1 Pumped liquids
The CMBE is designed for pumping water and other thin,
non-aggressive and non-explosive liquids, not containing solid
particles or fibers. If the pump has been used for dirty liquids;
e.g., pool water, it must be flushed through with clean water
immediately after use.
TM06 0794 0214
Pos. Component
1 Diaphragm tank
2 Pressure gauge 0-145 psi (0-10 bar)
3 Five way fitting with integrated non-return valve
4 CME pump
5 Pressure sensor
Caution
The pump should remain the packing until
installation.