Submittal Sheet

Constant Pressure Booster
CMBE Booster
2
10
Materials
Control panel
The control panel on the E-pump terminal box makes it
possible to change the setpoint settings manually.
MLE 1/2 to 2 Hp (0.37 to 2.2 kW)
The operating condition of the pump is indicated by the
Grundfos Eye on the control panel. See fig. 5, pos. A.
Fig. 5 Control panel on CRE pump
Set the desired setpoint by pressing or . The light
fields on the control panel will indicate the setpoint set.
Continuously pressing will stop the pump.
Designation Material
Terminal box Composite PC/ASA and silumin (Alu)
Stator housing Silumin (Alu)
Fan cover Composite PBT/PC
Pump housing Stainless steel, AISI 304/EN 1.4301
Shaft and impeller Stainless steel, AISI 304/EN 1.4301
Flange Cast iron
TM05 5993 4312
A