GRUNDFOS DATA BOOKLET COMFORT Circulator pumps 50/60 Hz
COMFORT Table of contents 1. Product description . . . . . . . . . . . . . . . . . . . . 3 Type key . . . . . . . . Approvals . . . . . . . Applications . . . . . . Performance range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .3 .4 .5 7. Product numbers . . . . . . . . . . . . . . . . . . . . . 29 COMFORT, International, DACH, GB, CN, RU, 50/60 Hz . . . .
1 Product description COMFORT 1. Product description Type key Approvals VDE-GS_APPROVALS_SMALL Outside USA Example: COMFORT 15-14 BXU PM DACH Explanation COMFORT 15-14 B Brass pump housing M Motor (pump head only) X Integrated isolating valve and nonreturn valve Length 140 mm / G 1 DT Digital Timer U Digital Uhr (DACH only) A AUTOADAPT PM Permanent magnet .
1 COMFORT Product description Applications Domestic hot-water systems Grundfos COMFORT circulator pumps are designed for the following: For circulation of drinking water in domestic hot-water systems, we recommend to use Grundfos COMFORT types with brass pump housing in systems with hot-water storage tanks. • domestic hot-water systems in single- and two-family houses • small heating systems • cooling and air-conditioning systems. TM059316 The pumps are suitable for open and closed systems.
1 Product description COMFORT Performance range H [m] 12 1.2 COMFORT 50/60 Hz 230 V COM FORT 10 1.0 8 0.8 6 0.6 4 0.4 2 0.2 0 0.0 COM 15-14 FOR 0.00 0.05 0.00 0.10 0.15 0.02 0.20 0.04 T 15 0.25 B, BA , -14 B BDT X, B XA, 0.06 0.30 BXD T 0.35 0.08 0.40 0.10 0.45 0.12 0.50 0.55 0.14 0.60 0.16 Q [m³/h] 0.18 Q [l/s] TM068755 p [kPa] COMFORT performance range (outside USA) H [m] H [ft] 1.2 4.0 COMFORT 50/60 Hz 115/230 V 3.5 COMF ORT 1 1.
2 COMFORT Operating conditions 2. Operating conditions Pumped liquids • Thin, clean, non-aggressive and non-explosive liquids without solid particles or fibres • Cooling liquids, not containing mineral oil • Domestic hot water • Softened water. The kinematic viscosity of water is 1 mm2/s (1 cSt) at 20 °C (68 °F) If the pump is used for a liquid with a higher viscosity, the hydraulic performance of the pump will be reduced.
3 Functions COMFORT 3. Functions COMFORT with AUTOADAPT AUTOADAPT in heating systems regulated with a thermostatic regulating valve COMFORT BA PM and BXA PM models have the following operation modes: • AUTOADAPT • temperature control mode • continuous 100 % mode. In systems including a thermostatic regulating valve, choose a COMFORT pump without the AUTOADAPT function.
3 COMFORT Functions Event log function The AUTOADAPT function incorporates an event log that learns the scheme of demand for hot water in the domestic hot-water system. Via the event log, the pump predicts when to start circulating hot water. Date The event log function stores the weekly tapping events in the system. The hot-water consumption pattern for two weeks is stored in the event log. See example.
3 COMFORT Continuous 100 % mode The regulation of the COMFORT AUTOADAPT models is based on temperature control. The operating range of the pump is kept within a calculated temperature range. This means that the pump operates in an average temperature area providing the maximum comfort and saves energy at the same time. Functions Temperature control mode for AUTOADAPT (BA, BXA) variants The pump is running continuously at full speed without any control.
3 COMFORT Operating panel COMFORT BDT and BXDT PM models have the following functions and operating modes: • Continuous 100 % mode. Set the pump to run in continuos 100 % mode with no defined operating periods. • Digital timer. Use the default operating schedule or customise the pump's operating periods. Continuous 100 % mode 1 9 2 8 3 The pump is running continuously at full speed without any control.
Construction 4 COMFORT 4. Construction Grundfos COMFORT PM circulator pumps are available in various pump housing versions and lengths incorporating isolating and non-return valves or prepared for subsequent fitting of such valves. The motor can be separated from the pump housing, enabling easy maintenance and replacement. The rotor bearing is self-adjusting and lubricated by the pumped liquid.
4 COMFORT Union nut The pump housing is designed in such a way that a high hydraulic efficiency is achieved when the energy produced by the impeller is converted into pressure. The pump housing thread enables connection to standard pipe dimensions. The union nut ensures that motor and pump housing are tightly connected. Thanks to the thread type, the seal ring is pressed evenly over the entire seal face.
4 Construction COMFORT Sectional drawing 11 A 3 24 2 1 14 23 B 10 9 11 8 13 18 12 21 22 TM068303 24 17 Sectional drawing of COMFORT PM Material specification Component Material 1 Stator lamination Steel 2 Stator windings Copper wire and enamel 3 Stator housing Aluminium/P66 8 Spherical separator Stainless steel 1.4016 430 9 Rotor can, complete Stainless steel/tungsten carbide 1.
5 COMFORT Performance curves 5. Performance curves Curve conditions The guidelines below apply to the performance curves on the following pages: • Test liquid: airless water. • The measurements for COMFORT PM have been made at a water temperature of 20 °C (68 °F). • All curves show average values and must not be used as guarantee curves. If a specific minimum performance is required, individual measurements must be made.
6 Data sheets COMFORT 6. Data sheets COMFORT 15-14 B PM, 15-14 B PM DACH, 15-14 B PM CN p H [kPa] [m] 12 1.2 1.0 8 0.8 4 TM082192 0.6 0.4 0.2 0.0 0.0 0.1 0.00 0.2 0.04 0.3 Q [m³/h] 0.4 0.08 Q [l/s] 0.12 TM063622 0 Connections: Rp 1/2. Various fittings, see section 8.1 Fittings. System pressure: Max. 10 bar. Liquid temperature: 2-95 °C (TF 95). IP class: IP44 Electrical data, 1 x 230 V, 50/60 Hz P1 [W (Hp)] I1/1 [A] 7 0.
6 COMFORT Data sheets COMFORT 15-14 BA PM, 15-14 BA PM DACH, 15-14 BA PM CN p H [kPa] [m] 12 1.2 1.0 8 0.8 0.6 4 0.4 0.0 0.0 0.1 0.00 0.2 0.04 0.3 0.08 Q [m³/h] 0.4 TM063622 0 TM1040640 0.2 Q [l/s] 0.12 Electrical data, 1 x 230 V, 50/60 Hz P1 [W (Hp)] I1/1 [A] 7 0.07 Connections: Rp 1/2. Various fittings, see section 8.1 Fittings. System pressure: Max. 10 bar Liquid temperature: 2-95 °C (TF 95).
6 COMFORT Data sheets COMFORT 15-14 BDT PM, 15-14 BU PM DACH, 15-14 BDT PM CN p H [kPa] [m] 12 1.2 1.0 0.8 TM082194 8 0.6 4 0.4 0.2 0.0 0.0 0.1 0.00 0.2 0.04 0.3 Q [m³/h] 0.4 0.08 0.12 TM063622 0 Q [l/s] Connections: Rp 1/2. Various fittings, see section 8.1 Fittings. System pressure: Max. 10 bar Liquid temperature: 2-95 °C (TF 95). IP class: IP44 Electrical data, 1 x 230 V, 50/60 Hz P1 [W] I1/1 [A] 7 0.
6 COMFORT Data sheets COMFORT 15-14 BX PM, COMFORT 15-14 BX PM DACH p H [kPa] [m] 12 1.2 1.0 8 0.8 0.6 0.4 TM082193 4 0.2 0.0 0.0 0.1 0.00 0.2 0.04 0.3 0.08 0.4 Q [m³/h] 0.12 TM068415 0 Q [l/s] Electrical data, 1 x 230 V, 50/60 Hz P1 [W] I1/1 [A] 7 0.07 Connections: G1 System pressure: Max. 10 bar Liquid temperature: 2-95 °C (TF 95).
6 COMFORT Data sheets COMFORT 15-14 BXA PM, 15-14 BXA PM DACH p H [kPa] [m] 12 1.2 1.0 8 0.8 0.6 4 0.4 0.2 0.0 0.1 0.00 0.2 0.04 0.3 0.08 0.4 Q [m³/h] 0.12 Q [l/s] TM082196 0.0 TM068415 0 Electrical data, 1 x 230 V, 50/60 Hz P1 [W] I1/1 [A] 7 0.07 Connections: G1 System pressure: Max. 10 bar Liquid temperature: 2-95 °C (TF 95).
6 COMFORT Data sheets COMFORT 15-14 BXDT PM, 15-14 BXU PM DACH p H [kPa] [m] 12 1.2 1.0 8 0.8 0.6 0.4 TM082195 4 0.2 0.0 0.0 0.1 0.00 0.2 0.04 0.3 0.4 0.08 Q [m³/h] 0.12 Q [l/s] TM068415 0 Electrical data, 1 x 230 V, 50/60 Hz P1 [W] I1/1 [A] 7 0.07 Connections: G1 System pressure: Max. 10 bar Liquid temperature: 2-95 °C (TF 95).
6 COMFORT Data sheets COMFORT 15-14 B PM GB p H [kPa] [m] 12 1.2 1.0 0.8 TM082197 8 0.6 4 0.4 0.2 0.0 0.0 0.1 0.00 0.2 0.04 0.3 Q [m³/h] 0.4 0.08 Q [l/s] 0.12 TM063622 0 Connections: Rp 1/2. Various fittings, see section 8.1 Fittings. System pressure: Max. 10 bar Liquid temperature: 2-95 °C (TF 95). IP class: IP44 Electrical data, 1 x 230 V, 50/60 Hz P1 [W] I1/1 [A] 7 0.
6 COMFORT Data sheets COMFORT 15-14 BA PM GB p H [kPa] [m] 12 1.2 1.0 8 0.8 0.6 4 0.4 0.2 0.0 0.1 0.00 0.2 0.04 0.3 Q [m³/h] 0.4 0.08 Q [l/s] 0.12 TM082198 0.0 TM063622 0 Electrical data, 1 x 230 V, 50/60 Hz P1 [W] I1/1 [A] 7 0.07 Connections: Rp 1/2. Various fittings, see section 8.1 Fittings. System pressure: Max. 10 bar (145 psi). Liquid temperature: 2-95 °C (TF 95).
6 COMFORT Data sheets COMFORT 15-14 MB PM DACH p H [kPa] [m] 12 1.2 1.0 0.8 TM1040639 8 0.6 4 0.4 0.2 0.0 0.0 0.1 0.00 0.2 0.04 0.3 0.08 Q [m³/h] 0.4 Q [l/s] 0.12 TM063622 0 Connections: Rp 1/2. Various fittings, see section 8.1 Fittings. System pressure: Max. 10 bar Liquid temperature: 2-95 °C (TF 95). IP class: IP44 Electrical data, 1 x 230 V, 50/60 Hz P1 [W] I1/1 [A] 7 0.
6 COMFORT 1.0 0.8 0.6 0.4 0.2 0.0 H [ft] 3.5 3.0 2.5 2.0 TM082199 H [m] 1.5 1.0 0.5 0.0 Q [US GPM] 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.0 0.1 0.2 0.3 Q [m³/h] 0.4 TM063625 Data sheets COMFORT 10-16 T PM BU/LC Connections: 1/2" NPT System pressure: Max. 145 psi Liquid temperature: 2-80 °C / 35-176 °F IP class: IP44 Electrical data, 1 x 115/230 V, 50/60 Hz P1 [W (Hp)] I1/1 [A] 6 (0.008) 0.
6 COMFORT 0.8 0.6 0.4 0.2 0.0 3.5 3.0 2.5 2.0 TM082200 1.0 H [ft] 1.5 1.0 0.5 0.0 Q [US GPM] 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.0 0.1 0.2 0.3 Q [m³/h] 0.4 TM063625 H [m] Data sheets COMFORT 10-16 DT PM BU/LC Connections: 1 1/4" NPSM System pressure: Max. 145 psi Liquid temperature: 2-80 °C / 35-176 °F IP class: IP44 Electrical data, 1 x 115/230 V, 50/60 Hz P1 [W (Hp)] I1/1 [A] 6 (0.008) 0.
6 COMFORT H [m] H [ft] 1.2 4.0 0.8 0.6 0.4 0.2 0.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 TM1040640 1.0 0.0 Q [US GPM] 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.0 0.1 0.2 0.3 Q [m³/h] 0.4 TM063624 Data sheets COMFORT 10-16 A PM B5/LC Electrical data, 1 x 115/230 V, 50/60 Hz P1 [W (Hp)] I1/1 [A] 6 (0.008) 0.07 Connections: 1/2" sweat System pressure: Max.
6 COMFORT H [m] H [ft] 1.2 4.0 0.6 0.4 0.2 0.0 3.0 2.5 2.0 1.5 1.0 0.5 TM1040640 0.8 3.5 0.0 Q [US GPM] 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.0 0.1 0.2 0.3 Q [m³/h] 0.4 TM063624 1.0 Data sheets COMFORT 10-16 A PM BN5/LC Electrical data, 1 x 115/230 V, 50/60 Hz P1 [W (Hp)] I1/1 [A] 6 (0.008) 0.07 Connections: 1/2" NPT System pressure: Max.
6 COMFORT 1.0 0.8 0.6 0.4 0.2 0.0 H [ft] 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 Q [US GPM] 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.0 0.1 0.2 0.3 Q [m³/h] 0.4 TM082203 H [m] TM063625 Data sheets COMFORT 10-16 A PM BU/LC Electrical data, 1 x 115/230 V, 50/60 Hz I1/1 [A] P1 [W (Hp)] 6 (0.008) 0.07 Connections: 1 1/4" NPSM System pressure: Max.
7 Product numbers COMFORT 7. Product numbers COMFORT, International, DACH, GB, CN, RU, 50/60 Hz Pump type Product number Port-to-port length [mm] Connection Isolating valve Non-return valve Market region Plug Supplied with page 6.
7 COMFORT Product numbers COMFORT, USA, 50/60 Hz Pump type COMFORT 10-16 T PM BU/LC Product number Port-to-port length [inches] 99412493 4 1/3" USA ★ ● ● page 6.10 COMFORT 10-16 T PM BU/LC ● page 6.11 COMFORT 10-16 DT PM BU/LC 1 1/4" NPSM Data sheet COMFORT 10-16 DT PM BU/LC 99812354 ● COMFORT 10-16 A PM B5/LC 98420222 ● page 6.12 COMFORT 10-16 A PM B5/LC ● page 6.
8 Accessories COMFORT 8. Accessories Fittings Description Connection Material Product number Non-return valve 1/2 Brass 96433904 Isolating valve 1/2 Brass 96433905 Fittings with integrated non-return valve and isolating valve 15mm soldering/R½" connection incl. G 1 x Rp 1/2 int. Brass 00ID8748 Union set G 1 1/4 x 15 mm int. R 1/2 ext. Brass 96433907 Union set G 1 1/4 x Rp 3/4 int. Brass 96433908 Union set G 1 1/4 x Rp 1/2 int. R 3/4 ext.
8 COMFORT TM019911 Accessories Spare parts Description Spare plug for COMFORT PM 32 Product number 98685259
9 Grundfos Product Center COMFORT 9. Grundfos Product Center Online search and sizing tool to help you make the right choice. From the international view, you can select your specific country to view the product range available to you. International view: https://product-selection.grundfos.
ECM: 1340027 98553150 04.22 GRUNDFOS Holding A/S Poul Due Jensens Vej 7 DK-8850 Bjerringbro Tel: +45 87 50 14 00 www.grundfos.com Trademarks displayed in this material, including but not limited to Grundfos and the Grundfos logo, are registered trademarks owned by The Grundfos Group. © 2022 Grundfos Holding A/S, all rights reserved.