Specification Sheet

Company name:
Created by:
Phone:
Date: 5/2/2016
Printed from Grundfos Product Center [2016.02.039]
Position Count Description
1 UP 10-16 A PM B5/LC
Product photo could vary from the actual product
Product No.: 98420222
The high-efficiency Grundfos Comfort PM range is a product for domestic hotwater re-circulation with
lead free drinking water suitable pump housing for single- and two-family houses powered by a high
efficiency single-phase, 12-pole, permanent-magnet motor.
Features and benefits:
* Quick and simple electrical installation due to the highly reliable ALPHA plug
* dry running detection
* Easy-to-clean and lime-insensitive spheric rotor
* Wearless operation due to liquid lubricated bearing
* No leakage risk due to a static seal
* Easy maintenance and cleaning through the easy-to-separate pump head fitting almost all
competitor pump housings
* Corrosion resistant lead free brass pump housing
* No additional motor protection necessary due to integrated motor electronics
Liquid:
Pumped liquid: Water
Liquid temperature range: 35.6 .. 203 °F
Liquid temp: 140 °F
Density: 61.35 lb/ft³
Technical:
TF class: 95
Approvals on nameplate: UL,CSA
Materials:
Pump housing: Brass MS 68
Impeller: Stainless steel, EPDM, PPO, PTFE, Graphit
Installation:
Maximum operating pressure: 145 psi
Flange standard: USA Sweat
Pipe connection: 1/2" Sweat
Pressure stage: 10
Port-to-port length: 3 1/8 in
Electrical data:
C run: 0.6 µF
Max. power input: 6 W
Main frequency: 60 Hz
1/6

Summary of content (6 pages)