User Guide

English (US)
40
9. Setting the product
9.1 Operating panel
Fig. 56 Operating panel
9.2 Menu structure
The pump incorporates a startup guide which is started at the first
startup. After the startup guide, the four main menus appear in
the display. See section 8. Control functions.
"Home"
This menu shows up to four user-defined parameters with
shortcuts or a graphical illustration of a performance curve. See
section 9.4 "Home" menu.
"Status"
This menu shows the status of the pump and system as well as
warnings and alarms. See section 9.5 Status menu.
"Settings "
This menu gives access to all setting parameters. You can make
a detailed setting of the pump in this menu. See section
9.6 "Settings" menu.
"Assist"
This menu enables assisted pump setup, provides a short
description of the control modes and offers fault advice. See
section 9.7 "Assist" menu.
• Shortcut to control mode settings
• Shortcut to setpoint settings
• "Estimated flow"
•"Head".
CAUTION
Hot surface
Minor or moderate personal injury
- At high liquid temperatures, the pump housing may
be so hot that only the operating panel may be
touched to avoid burns.
TM05 7642 1313
Button Function
Goes to the "Home" menu.
Returns to the previous display.
Navigates between main menus, displays and
digits.
When the menu is changed, the display always
shows the top display of the new menu.
Navigates between submenus.
Saves changed values, resets alarms and expands
the value field.
You cannot make settings in this menu.