Submittal Sheet

ManualsBrandsGrundfos ManualsCirculator PumpsMAGNA1 32-100 GF 15/26 Cast Iron Circulator Pump (115/230V)

Company name:

Created by:

Phone:

Date: 1/13/2016

Printed from Grundfos Product Center [2015.09.024]

Position Count Description

1 MAGNA1 32-100 F

Product No.: 98126823

MAGNA1 circulator pump with easy selection of pump setting

The pump is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and

with only two gaskets for sealing.

The bearings are lubricated by the pumped liquid.

In order to avoid problems in connection with disposal, great importance has been attached to using

as few different materials as possible.

A pump with no maintenance requirements and extremely low life cycle cost.

Heating systems

• Main pump

• mixing loops

• heating surfaces

• air-conditioning surfaces.

The MAGNA1 circulator pumps are designed for

circulating liquids in heating systems with variable flows where it is desirable to optimize the setting of

the pump duty point, thus reducing energy costs. The pumps are also suitable for domestic hot-water

systems.

To ensure correct operation, it is important that the sizing range of the system falls within the duty

range of the pump.

The pump is also suitable for systems with

hot-water priority as an external signal can

immediately force the pump to operate according to the max. curve, for example in solar-heating

systems.

Benefits

• Safe selection.

• Simple installation.

• Low energy consumption. All MAGNA1 pumps comply with the EuP requirements.

• Nine light fields for indication of pump setting. Three proportional-pressure curves, three

constant-pressure curves and three fixed-speed curves are available.

• Low noise level.

• No maintenance and long life.

Liquid:

Pumped liquid: Water

Liquid temperature range: 14 .. 230 °F

Liquid temp: 140 °F

Density: 61.35 lb/ft³

Technical:

TF class: 110

Approvals on nameplate: ETL, FCC WO_RADIAL

Materials:

Pump housing: Cast iron

EN-GJL-250

ASTM A48-250B

1/3

Summary of content (3 pages)

PAGE 1
Company name: Created by: Phone: Date: Position 1/13/2016 Count Description 1 MAGNA1 32-100 F Product No.: 98126823 MAGNA1 circulator pump with easy selection of pump setting The pump is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible.
PAGE 2
Company name: Created by: Phone: Date: Position 1/13/2016 Count Description Impeller: PES 30%GF Installation: Range of ambient temperature: Maximum operating pressure: Flange standard: Pipe connection: Pressure stage: Port-to-port length: 32 .. 104 °F 174 psi GF GF15/26/40/43 PN12 6 1/2 in Electrical data: Power input - P1: Main frequency: Rated voltage: Maximum current consumption: Enclosure class (IEC 34-5): Insulation class (IEC 85): 8.62 .. 178 W 60 Hz 1 x 115-230 V 0.28 .. 1.
PAGE 3
Company name: Created by: Phone: Date: Description General information: Product name: Product No.: EAN: Price: Value MAGNA1 32-100 F 98126823 5710629499851 On request 1/13/2016 H [ft] MAGNA1 32-100 F, 60Hz eta [%] Pumped liquid = Water Liquid temperature = 140 °F Density = 61.35 lb/ft³ 35 30 Technical: Head max: TF class: Approvals on nameplate: Model: Materials: Pump housing: 32.