Brochure

Product range
MAGNA3
3
19
Grundfos Eye
The Grundfos Eye at the top of the control panel is a
pump status indicator light providing information about
the pump operating status.
The indicator light will flash in different sequences and
provide information about the following:
• power on/off
• pump warnings
• pump alarms
• remote control.
The function of the Grundfos Eye is described in detail
in the installation and operating instructions.
Fig. 30 Grundfos Eye
Communication
The MAGNA3 enables communication via the
following:
• wireless Grundfos GO Remote
• fieldbus communication via CIM modules
• digital inputs
• relay outputs
• analog input.
Grundfos GO Remote
Fig. 31 Grundfos GO Remote
The MAGNA3 is designed for wireless communication
with the Grundfos GO Remote.
For more details, see section Grundfos GO Remote,
page 31.
The Grundfos GO Remote offers additional
possibilities of setting and status displays for the
pump.
The Grundfos GO Remote can be used for the
following functions:
• Reading of operating data.
• Reading of warning and alarm indications.
• Setting of control mode.
• Setting of setpoint.
• Selection of external setpoint signal.
• Allocation of pump number making it possible to
distinguish between pumps that are connected via
Grundfos GENIbus.
• Selection of function for digital input.
• Generation of reports (PDF).
• Assist function.
• Multi-pump setup.
• Displaying relevant documentation.
http://GRUNDFOS.COM/MAGNA3-MANUAL
TM05 3810 1612
TM05 3825 1712