Submittal Sheet

Subject to alterations.
GRUNDFOS A/S . DK-8850 Bjerringbro . Denmark
Telephone: [phone]
www.grundfos.com
97699316
1013
ECM: 1123591
The name Grundfos, the Grundfos logo, and be think innovate are registered trademarks owned by Grundfos Holding A/S or Grundfos A/S, Denmark. All rights reserved worldwide. © Copyright Grundfos Holding A/S
Dimensions
* NPT thread only applies to 60 Hz models.
Length of supply cable: 15 meters (49.21 feet)
Max. installation depth: 10 meters (32.81 feet)
Electrical data
Insulation class: IP68.
Enclosure class: B.
Construction
1)
Only fitted on models with integrated suction strainer.
2)
Only fitted on models with floating suction strainer.
Approvals and markings
The SB pump has the following approvals and
markings:
•GOST (Russia)
•UL/CSA
•C-tick
•CE.
TM04 6243 5109 - TM04 6928 1210
Model with integrated suction strainer Model with floating suction strainer
G 1" (NPT)
G 1" (NPT)
G 3/4" (NPT 3/4")*
G 3/4" (NPT 3/4")*
D
D
Pump type
HH1D
[mm] [Inch] [mm] [Inch] [mm] [Inch]
SB 3-35 536 21.10 390 15.35 150 5.91
SB 3-45 560 22.05 415 16.34 150 5.91
Pump
type
Voltage
[V]
Frequency
[Hz]
P1
I
1/1
[A]
n
[min
-1
]
[kW] [hp]
SB 3-35 1 x 220 - 240 50 0.80 1.07 3.8 2800
SB 3-45 1 x 220 - 240 50 1.05 1.41 4.8 2800
SB 3-35 1 x 110 - 120 60 0.91 1.22 8.6 3400
SB 3-45 1 x 110 - 120 60 1.07 1.43 9.9 3400
Component Material
Cover Polypropylene (PP30GF)
Impeller Polypropylene (PPO20GF)
Chamber Polypropylene (PPO20GF)
Shaft with rotor Stainless steel (EN 1.4401/AISI 416)
Wetted part of shaft Stainless steel (EN 1.4301/AISI 304)
Strainer
1)
Stainless steel (EN 1.4301/AISI 304)
Inlet collar
2)
Stainless steel (EN 1.4301/AISI 304)
Cable Neoprene H07RN-F
O-rings NBR
Pump housing Polypropylene (PP30GF)
Base Polypropylene (PP30GF)
Stator housing Stainless steel (EN 1.4301/AISI 304)
Component Material