Specification

MQ
Domestic water supply
3
24
Operating conditions
Installation
Location
The pump is suitable for indoor and outdoor
installation. It is resistant to sunlight. For outdoor
installation, the pump must be fitted with a protective
cover (accessory). Should the unlikely event of an
internal leakage occur, pumped liquid will be drained
out from the base and/or end cover instead of
damaging the pump. Install the pump in such a way
that no undesirable collateral damage can arise.
Positioning the pump
Mount the pump on the base plate with horizontal
suction port and vertical discharge port.
The pump must be installed horizontally.
The maximum permissible inclination angle is
+/- 18 °.
To prevent movement and vibrations, the pump and
base plate can be secured to a solid foundation by
means of the bolt holes in the base plate.
Selection of product
MQ is available in two sizes and two voltages.
System pressure: Max. 109 psi (7.5 bar)
Inlet pressure: Max. 40 psi (2.8 bar)
Suction lift: Max. 26 ft (8 m)
Liquid temperature: 32°F to +95°F (0°C to +35°C)
Ambient temperature: 32°F to +113°F (0°C to +45°C)
Model
Voltage
[V]
Product number
MQ 3-35
115 96860172
230 96860201
MQ 3-45
115 96860195
230 96860207