freshwatersystems.
Product Guide MQ Flow Based Pressure Boosting System Application Features and benefits The MQ pump is designed for water supply and pressure boosting ... • Complete system The MQ is a complete, all-in-one unit, incorporating pump, motor, diaphragm tank, pressure and flow sensor, controller and check valve. The controller ensures that the pump starts auto matically when water is consumed and stops auto matically when the consumption ceases.
Product Guide MQ Flow Based Pressure Boosting System Control panel operation Pos. 2 4 1 1 3 2 Function Description ON/OFF button Power indicator lights 3 5 TM01 9684 2600 6 The Pump is started and stopped by means of the ON/OFF button. Indicates that the pump is ready for operation (green). Indicates that the pump is on standby (red). 4 Pump ON (green) Indicates that the pump is running. 5 Auto reset (green) Indicates that the auto reset function is active.
Product Guide MQ Flow Based Pressure Boosting System Material specification Pos. Components Pos. Material Components Material 101 Suction port PPO+20% Glass Fiber PPO+20% Glass Fiber 103 104 Shaft seal: Stationary and rotating part Carbon/ceramics/NBR rubber Self-priming valve PP+30% Glass Fiber 149 Insulation disc PA 5VA (Polyammide) Self-priming part PPO+20% Glass Fiber Pump sleeve Stainless steel, DIN W.-Nr. 1.4301, AISI 304 Shaft 16 Stainless steel, DIN W.-Nr 1.
Product Guide MQ Flow Based Pressure Boosting System Flooded suction (0 PSI inlet) performance curves* *See suction lift performance curves for installations with water level below intake.
Product Guide MQ Flow Based Pressure Boosting System MQ 3-35 Suction lift performance curves H [ft] p [psi] MQ model 3-35 MQ 3-35 B 110 H [m] 60 Hz 60 0 Ft 45 100 3.3 Ft 40 40 90 80 6.6 Ft 35 13.1 Ft 70 32 19.7 Ft 30 23.0 Ft 26.2 Ft 60 25 24 50 20 40 16 15 30 10 20 10 0 8 5 0 0 0 0 4 8 1 12 2 16 3 20 4 Provided it is filled with water, the pump is able to lift water from a depth of 26 ft (8 m) in less than 5 minutes.
Product Guide MQ Flow Based Pressure Boosting System MQ 3-45 Suction lift performance curves H [ft] 140 p [psi] MQ model 3-45 MQ 3-45 B H [m] 60 Hz 60 60 0 Ft 130 3.3 Ft 40 6.6 Ft 120 50 13.1 Ft 110 19.7 Ft 100 32 23.0 Ft 90 40 26.2 Ft 80 24 70 30 60 50 16 20 40 30 8 10 20 10 0 0 0 0 0 4 8 1 12 2 16 3 20 4 Provided it is filled with water, the pump is able to lift water from a depth of 26 ft (8 m) in less than 5 minutes.
Product Guide MQ Flow Based Pressure Boosting System Accessories Protection Cover: Designed to protect the MQ Key Pad and electronics in outdoor applications. Protection cover is required for outdoor applications where the MQ is exposed to the elements. The protection cover is sold as an accessory PN 96693071. The cover is made of polypropylene and is a snap fit to the MQ. Two Velcro tabs are included with the accessory to help adhear the back end of the cover to the pump. freshwatersystems.
