TP50-240/2 Products Guide

General data
VersaFlo® TP
10
3)
The shaft seal is not standard, but available on request.
Pumped liquids Notes
Additional
information
Shaft seal
TP
Water
Groundwater
<+194°F AUUE
>+194°F BUBE
Boiler feed water <+248°F BUBE
District heating water <+248°F BUBE
Condensate
<+194°F AUUE
>+194°F BUBE
Softened water C
<+194°F AUUE
>+194°F BUBE
Brackish water G
pH>6.5, +40°F,
1000 ppm Cl
-
BUBE
AUUE
Coolants
Ethylene glycol B, D, H +122°F, 50%
AUUE
RUUE
Glycerine (glycerol) B, D, H +122°F, 50%
AUUE
RUUE
Potassium acetate B, D, C, H +122°F, 50%
AUUE
RUUE
Potassium formate B, D, C, H +122°F, 50%
AUUE
RUUE
Propylene glycol B, D, H +122°F, 50%
AUUE
RUUE
Brine-sodium chloride B, D, C, H +41°F, 30%
AUUE
RUUE
Synthetic oils
Silicone oil B, E
BUBE
AUUE
Vegetable oils
Corn oil B, F, E
BUBV
3)
AUUV
3)
Olive oil B, F, E <+176°F
BUBV
3)
AUUV
3)
Peanut oil B, F, E
BUBV
3)
AUUV
3)
Grape seed oil D, B, F, E
BUBV
3)
AUUV
3)
Soybean oil B, F, E
BUBV
3)
AUUV
3)
Cleaning agents
Soap (salts of fatty acids) A, E, (F) <+176°F
AUUE
(AUUV)
3)
Alkaline degreasing agent A, E, (F) <+176°F
AUUE
(AUUV)
3)
Oxidants
Hydrogen peroxide <+104°C, <2%
BUBE
AUUE
Salts
Ammonium bicarbonate A <+68°F, <15% AUUE
Calcium acetate A, B <+68°F, <30% AUUE
Potassium bicarbonate A <+68°F, <20% AUUE
Potassium carbonate A <+68°F, <20% AUUE
Potassium permanganate A <+68°F, <10% AUUE
Potassium sulfate A <+68°F, <20% AUUE
Sodium acetate A <+68°F, <100% AUUE
Sodium bicarbonate A <+68°F, <2% AUUE
Sodium carbonate A <+68°F, <20% AUUE
Sodium nitrate A <+68°F, <40% AUUE
Sodium nitrite A <+68°F, <40% AUUE
Sodium phosphate (di) A <+212°F, <30% AUUE
Sodium phosphate (tri) A <+194°F, <20% AUUE
Sodium sulfate A <+68°F, <20% AUUE
Sodium sulfite A <+68°F, <1% AUUE
Alkalis
Ammonium hydroxide <+212°F, <30% AUUE
Calcium hydroxide A <+212°F, <10% AUUE
Potassium hydroxide A <+68°F, <20% AUUE
Sodium hydroxide A <+104°F, <20% AUUE
Pumped liquids Notes
Additional
information
Shaft seal
TP