TP50-160/2 Products Guide
Table Of Contents
- Mission
- General data
- Cross reference guide: B&G, Taco and Armstrong to Grundfos
- Performance range, TP
- Product range, TP
- Type key, TP
- Applications
- Construction, TP
- TP technical data
- Material specification, TP
- Sectional drawing, TP
- Motor
- Pump
- Surface treatment
- Motor stool
- Pump shaft
- Coupling
- Impeller
- Shaft seal
- Space requirements
- Pumped liquids
- Liquid temperature
- List of pumped liquids
- Legend for notes in the list
- Performance curves
- Data charts
- Submittal data sheet
- Further product documentation
General data
VersaFlo® TP
6
Product range, TP
Type key, TP
Applications
Grundfos TP circulator pumps, are designed for
circulation of liquids in heating and air-conditioning
systems. Pumps with bronze pump housings are
suitable for circulation in domestic hot water systems.
General examples of systems in which TP pumps are
suitable are listed below.
• Boiler/Hydronic heating
• Chilled water
• Air conditioning systems
• Cooling towers
• Domestic hot water
• Radiant floor heat
• Solar
• Snow melt systems.
Pump type Flow Head PH HP Flange Page
TP32-40/4 8-50 U.S. GPM 3.5-12 FEET 1, 3 1/3 1 1/4"- 2 Bolt with 5/8" Hole 10
TP32-80/2 8-55 U.S. GPM 11-24 FEET 1, 3 1/2 1 1/4"- 2 Bolt with 5/8" Hole 10
TP32-160/2 8-70 U.S. GPM 18-47 FEET 1, 3 3/4 1 1/2"- 2 Bolt with 5/8" Hole 10
TP 40-40/4 8-70 U.S. GPM 5-12 FEET 1, 3 1/3 1 1/2"- 2 Bolt with 5/8" Hole 12
TP 40-80/2 8-80 U.S. GPM 16-29 FEET 1, 3 3/4 1 1/2"- 2 Bolt with 5/8" Hole 12
TP40-160/2 8-85 U.S. GPM 22-46 FEET 1, 3 3/4 1 1/2"- 2 Bolt with 5/8" Hole 12
TP40-240/2 8-100 U.S. GPM 33-63 FEET 1, 3 1 1/2 1 1/2"- 2 Bolt with 5/8" Hole 12
TP50-40/4 8-100 U.S. GPM 7-13 FEET 1, 3 1/3 2"- 4 Bolt with 5/8" Hole 14
TP50-80/2 8-120 U.S. GPM 14-32 FEET 1, 3 3/4 2"- 4 Bolt with 5/8" Hole 14
TP50-160/2 8-140 U.S. GPM 22-47 FEET 1, 3 1 1/2 2"- 4 Bolt with 5/8" Hole 14
TP50-240/2 8-150 U.S. GPM 27-63 FEET 1, 3 2 2"- 4 Bolt with 5/8" Hole 14
TP80-40/4 12-170 U.S. GPM 4-13 FEET 1, 3 1/2 3" ANSI 125lb RF 16
TP80-80/4 12-200 U.S. GPM 17-28 FEET 1, 3 1 1/2 3" ANSI 125lb RF 16
TP80-160/2 12-220 U.S. GPM 22-48 FEET 1, 3 3 3" ANSI 125lb RF 16
TP80-240/2 12-240 U.S. GPM 26-67.5 FEET 1, 3 3 3" ANSI 125lb RF 16
TP100-40/4 25-200 U.S. GPM 8-13.5 FEET 1, 3 1 4" ANSI 125lb RF 18
TP100-80/4 25-300 U.S. GPM 18-28 FEET 1, 3 2 4" ANSI 125lb RF 18
TP100-160/2 25-300 U.S. GPM 25-49 FEET 1, 3 3 4" ANSI 125lb RF 18
Example TP 32 -40 /4
Pump range
Nominal flange diameter [mm]
Max. head [dm]
Number of motor poles