Submittal Sheet

ManualsBrandsGrundfos ManualsCirculator PumpsTP40-240/2 Direct Coupled In-Line Circulator, 1-1/2 HP, BUBE Seal, Cast Iron, 115/208-230V, GF 40/43 Flange Mount

Company name:

Created by:

Phone:

Fax:

Date:

Printed from Grundfos CAPS [2011.05.069]

Position Count Description Unit price

-1 On

request

TP 40-240/2 U-G-A-BUBE

Product photo could vary from the actual product

Product No.: 96411802

Single-stage centrifugal in-line single-head pump.

The in-line design with opposite suction and dis-

charge ports enables mounting in pipework or on

a concrete foundation.

The shaft seal is a corrosion-resistant

maintenance-free mechanical seal.

The motor is a 1-phase AC motor.

Liquid:

Liquid temperature range: 5 .. 284 °F

Density: 62.4 lb/ft³

Technical:

Speed for pump data: 3490 rpm

Rated flow: 63 US gpm

Rated head: 51.2 ft

Shaft seal: BUBE

Maximum operating pressure: 145 psi

Approvals on motor nameplate: UL Recognized Component, CSA

Materials:

Pump housing: Cast iron

EN-JL1040

ASTM 25 B

Impeller: Stainless steel

DIN W.-Nr. 1.4301

AISI 304

Installation:

Maximum ambient temperature: 104 °F

Maximum operating pressure: 145 psi

Flange standard: USA

Pipe connection: 1 1/2"

Electrical data:

1/4

Summary of content (4 pages)

PAGE 1
Company name: Created by: Phone: Fax: Date: Position Count -1 - Description Unit price TP 40-240/2 U-G-A-BUBE On request Product photo could vary from the actual product Product No.: 96411802 Single-stage centrifugal in-line single-head pump. The in-line design with opposite suction and discharge ports enables mounting in pipework or on a concrete foundation. The shaft seal is a corrosion-resistant maintenance-free mechanical seal. The motor is a 1-phase AC motor.
PAGE 2
Company name: Created by: Phone: Fax: Date: Position Count Description Unit price Motor type: Number of poles: Rated power - P2: Main frequency: Rated voltage: Service factor: Rated current: Starting current: Cos phi - power factor: Rated speed: Motor efficiency at full load: Insulation class (IEC 85): Baldor, TEFC 2 1.48 HP 60 Hz 1 x 115/208-230 V 1,3 17/9,5-8,6 A 79,8/43,8-39,9 A 79 3450 rpm 71 % B Others: Net weight: Gross weight: Shipping volume: 80.9 lb 87.5 lb 1.
PAGE 3
Company name: Created by: Phone: Fax: Date: Description Product name: Product Number: EAN number: - H (ft) Value TP 40-240/2 U-G-A-BUBE U-G-A BUBE 96411802 5700390524302 TP 40-240/2, 60 Hz Density = 62.4 lb/ft³ 50 40 Baldor, TEFC 2 1.48 HP K 60 Hz 1 x 115/208-230 V 1,3 17/9,5-8,6 A 79,8/43,8-39,9 A 20,4/11,3-10,2 A 79 3450 rpm 71 % B CONTACT internal 85700005 Others: Net weight: Gross weight: Shipping volume: Country code: 80.9 lb 87.5 lb 1.98 ft³ Namreg Printed from Grundfos CAPS [2011.05.
PAGE 4
Company name: Created by: Phone: Fax: Date: - 96411802 TP 40-240/2 60 Hz 3 3/16" M12 4" 4" 6 3/16" 5" 2 7/8" 5/8" 1 11/16" NPT 1/4 2 11/16" 20 1/16" 7 1/4" 2 1/16" 2 9/16" 5 1/4" 6 3/4" 13 1/2" 3 15/16" Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos CAPS [2011.05.