Brochure

Functions
UP, UPS Series 200
7
15
7. Functions
Functions
 Canada only
 Standard
 The speed is changed by reconfiguring the jumper positions, located in the terminal box.
 Optional
❑ Required
 External contactor is not required when using the Protection Module option.
Standard module: Indicator lights with no motor protection. For motor protection, use Protection Module for 1 x 115/230 V and 3 x 208/230 V units or
use an external contactor.
Protection module: Indicator lights with built-in motor protection. Connect directly to line voltage.
Note: Pumps with protection module must not be connected to a variable frequency drive (VFD).
Relay module: Indicator lights with signal output for external control or fault indication (1 x 115/230 V or 3 x 208/230 V units only).
External contactor required: Pump must be connected to line voltage via an external contactor. The contactor is to be connected to the pump’s build-in
thermal overload terminals. The speed is changed by orientation of the internal jumpers.
UPS terminal box includes
Additional terminal box
options External
contactor
required
Number of
speeds
Pump model Voltage options
Speed
switch
Standard
module
Protection
module
Terminal
block
Protection
module
Relay
module
UPS 32
1 x 115/230
■■ ●
3
3 x 208/230
■■ ●●
 3
3 x 460
Δ■❑
2
3 x 575 
Δ■❑
2
UPS 40
1 x 115/230
■■ ●
3
3 x 208/230
■■ ●●
 3
3 x 460
Δ■❑
2
3 x 575 
Δ■❑
2
UPS 50
1 x 115/230
■■ ●
3
3 x 208/230
■■ ●●
 3
3 x 460
Δ■❑
2
3 x 575 
Δ■❑
2
UPS 53-55/57
1 x 115/230
■■ ●
3
1 x 230
■■ ●
3
3 x 208/230
■■ ●●
 3
3 x 460
Δ■❑
2
3 x 575 
Δ■❑
2
UPS 75-69
1 x 230
■■ ●
3
3 x 208/230
■■ ●
3
3 x 460
■■ ●●
 3
3 x 575 
Δ■❑
2
UPS 80
1 x 115/230
■■■●
3
3 x 208/230
■■ ●●
 3
3 x 460
Δ■❑
2
3 x 575 
Δ■❑
2
UPS 100
1 x 115/230
■●
3
3 x 208/230
■■■ ●●
 3
3 x 460
Δ■❑
2
3 x 575 
Δ■❑
2
UP 43-70 1 x 115/230
■❑
1
UP 43-110 1 x 115
■❑
1
UP 53-45 1 x 115/230
■❑
1
UP 53-46 1 x 115/230
■❑
1