Brochure

ManualsBrandsGrundfos ManualsCirculator PumpsUPS50-80/4 VersaFlo Cast Iron Circulator Pump 230V, 3/4 HP

Table Of Contents

GRUNDFOS PRODUCT GUIDE

Large UP, UPS

Series 200 circulator pumps

60 Hz

Summary of content (68 pages)

PAGE 1
GRUNDFOS PRODUCT GUIDE Large UP, UPS Series 200 circulator pumps 60 Hz
PAGE 2
Large UP, UPS Table of contents 1. 2. 3. 4. 5. 6. 7. 8. 9.
PAGE 3
UP, UPS Series 200 1 Introduction Applications The Grundfos UP(S) Series 200 line of wet rotor circulators is unique to commercial building services. Most competitor pumps are dry runners. UP(S) wet rotor circulators, on the other hand, are designed so that the water being pumped surrounds the rotor, cooling and lubricating the shaft and bearings. The pumps are designed for circulation of liquids in heating and air-conditioning systems. They can also be used in domestic hot-water systems.
PAGE 4
UP, UPS Series 200 1 Product introduction Identification Type key Example UPS 50 -40 (/2) F (B) Type range - UP: Single-speed pump - UPS: Two- or three-speed pump Nominal flange diameter [mm] Max.
PAGE 5
UP, UPS Series 200 2 Product overview 2. Product overview Performance range, UPS pumps The curves show maximum performance curves for the UPS range: • single-voltage pumps • two- and three-speed pumps.
PAGE 6
UP, UPS Series 200 2 Product overview Performance range, UP pumps The curves show maximum performance curves for the UP range: • dual-voltage pumps • single-speed pumps.
PAGE 7
UP, UPS Series 200 3 Product range 3.
PAGE 8
UP, UPS Series 200 4 Cross-reference guide 4. Cross-reference guide Armstrong, B&G and TACO to Grundfos Manufacturer Armstrong TACO Port-to-port length [in] Flange size [in] ARMflo E21 8.50 1.50 UP43-110F 8.50 1.50 ARMflo E23 8.50 1.50 UP43-110F 8.50 1.50 S 45 10.00 2.50, 3 UP53-45F 9.88 2.00, 2.50, 3.00 S 46 10.00 2.50, 3 UP53-46F  9.88 2.00, 2.50, 3.00 S 55 12.00 3.00 UPS53-55/57F 11.88 2.00, 2.50, 3.00 S 57 12.00 3.00 UPS53-55/57F 11.88 2.00, 2.50, 3.
PAGE 9
UP, UPS Series 200 B&G Model Port-to-port length [in] Flange size [in] 2-1/2" 10.00 2.50 LD3 10.00 HD3 Port-to-port length [in] Flange size [in] UP53-45F  9.88 2.00, 2.50, 3.00 3.00 UP53-45F  9.88 2.00, 2.50, 3.00 10.00 3.00 UP53-46F 9.88 2.00, 2.50, 3.00 PD-35 12.00 3.00 UPS53-55/57F 11.88 2.00, 2.50, 3.00 PD-37 12.00 3.00 UPS53-55/57F 11.88 2.00, 2.50, 3.00 PD-38 14.50 3.00 UPS75-69F 14.00 2.00, 2.50, 3.00 PD-40 14.50 3.00 UPS50-160/2  14.00 2.
PAGE 10
UP, UPS Series 200 5 Construction 5. Construction Construction TM03 7880 5106 UP(S) Series 200 pumps are of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. Attention has been focused on using as few materials as possible, and the use of materials that might cause problems in connection with disposal have been omitted. Features: • UPS motors are two- or three-speed motors.
PAGE 11
UP, UPS Series 200 5 Pos. Description Material 1 Terminal box 2 Inspection screw Brass with nickel 3 Nameplate Composite PA66 AISI/ASTM Composite PA66 Pos.
PAGE 12
UP, UPS Series 200 5 Construction Motor Rotor can The motor, pos. 4, is a 2- or 4-pole, asynchronous squirrel-cage motor. As the motor is cooled by the pumped liquid, the noise level is very low. The rotor can (pos. 7) is made of drawn steel sheet and fitted with an inspection screw directly at the top. There is an O-ring seal between the inspection screw and the rotor can. For reasons of safety, the hole for the inspection screw will deflect a possible jet of liquid if the inspection screw is removed.
PAGE 13
UP, UPS Series 200 6 Pumped liquids Other technical data CAUTION: This pump is intended for use with water only. Grundfos UP(S) pumps can be used to circulate • Potable hot water • Water for hydronic heating • Water/glycol mixtures up to 50/50 • Cooling water. In domestic hot-water systems it is advisable to use a bronze pump (UP(S) model) only for water with a degree of hardness lower than 14 grains per gallon of hardness.
PAGE 14
UP, UPS Series 200 6 Operating conditions Electrical data Insulation class Supply voltage and frequency Pump type UPS: 115 V, 230 V, 1-phase 60 Hz, 208-230 V, 460 V, 575 V, 3 phase 60 Hz. UP: 115 V, 230V, 1-phase 60 Hz, 460 V, 575 V, 3-phase 60Hz. Back-up fuse: Max. 10 A. Enclosure class: IP 44 indoor use only. Supply voltage tolerances The motors meet the requirements to temperature rise at - 6 / +6 %. Furthermore, the motors have been tested at -10 / +10 % of the voltage range.
PAGE 15
UP, UPS Series 200 7 Functions 7.
PAGE 16
UP, UPS Series 200 7 Functions Description of functions Indicator lights and speed indication TM00 9747 0602 Three-speed pumps TM00 9235 3802 Speed switch Fig. 7 3 x 208/230V terminal box Fig. 10 UPS Series 200 pump with terminal box mounted Two-speed pumps All UPS pumps with 3 x 460 V & 575 V terminal boxes are fitted with a special two-speed terminal block. By means of the speed switch, the pump performance can be adjusted to suit the system in question.
PAGE 17
UP, UPS Series 200 7 Functions Single-phase pumps Single-phase pumps incorporate a green indicator light only: Jumpers L Indicator light N On The electricity supply has been switched on. Off The electricity supply has been switched off, or the pump has been cut out by the thermal overload switch. TM02 5761 3902 P2 P1 T1 T5 T3 T4 T2 T8 Fig.
PAGE 18
UP, UPS Series 200 7 Functions Protection module indicator lights Indicator lights Description Indicator lights Description Green Red Off Off On Off On On Off On The pump has been stopped. The electricity supply has been switched off. The pump is operating. Three-phase pumps only: The pump is operating, but the direction of rotation is wrong. The pump has been cut out by the thermal overload switch.
PAGE 19
UP, UPS Series 200 8 Technical data 8. Technical data Technical data, UPS Model Cast iron product number Bronze product number 96402694 96402699 Max. Hp Speed 3 Ph Voltage 115 1 96402695 UPS 32-40/4 96402696 96402697 96402698 96402708 96402700 96402701 230 0.33 96402702 208-230 3 96402703 460 575 96402713 115 1 96402709 UPS 32-80/2 96402710 96402711 96402712 96402730 96402714 96402715 230 0.
PAGE 20
UP, UPS Series 200 8 Technical data Model Cast iron product number Bronze product number Max. Hp Speed 3 Ph Voltage 96402748 96402753 115 1 96402749 UPS 40-40/4 96402750 96402751 96402752 96404948 96402754 96402755 230 0.33 96402756 208-230 3 96402757 460 575 96404953 115 1 96404949 UPS 40-80/4 96404950 96404951 96404952 96402762 96404954 96404955 230 0.
PAGE 21
UP, UPS Series 200 Cast iron product number Bronze product number 96402782 96402787 Max. Hp Speed 3 Ph Voltage 115 1 96402783 UPS 40-160/2 96402784 96402785 96402786 96402797 96402798 96402788 96402789 230 0.75 96402790 208-230 3 96402791 460 575 96402804 1 96402805 230 208-230 1.50 UPS 40-240/2 96402799 96402801 96402814 96402807 3 96402809 460 575 96402819 115 1 96402815 UPS 50-40/4 96402816 96402817 96402818 96402820 96402821 230 0.
PAGE 22
UP, UPS Series 200 8 Technical data Model Cast iron product number Bronze product number 96404958 96404963 Max. Hp Speed 3 Ph Voltage 115 1 96404959 UPS 50-80/4 96404960 96404961 96404962 96402834 96404964 96404965 230 0.
PAGE 23
UP, UPS Series 200 Cast iron product number Bronze product number 96654373 96654392 Max. Hp Speed 3 Ph Voltage 115 1 96654374 UPS 53-55/57 96654375 96654376 96654377 96654378 96654379 96654393 96654394 96654391 96402894 96402895 96402896 96402908 96402920 UPS 80-160/2 208-230 3 96654396 460 575 96654397 1 96654398 230 208-230 1.50 96654390 UPS 80-80/4 0.
PAGE 24
UP, UPS Series 200 8 Technical data Model UPS 100-40/4 Cast iron product number Bronze product number 96402934 96402937 96402935 96402936 96402938 Max. Hp Speed 3 Ph Voltage 208-230 1.00 3 460 96401961 575 Speed I-MAX. [Amps] P-MAX. [Watts] Istart [Amps] 3 2.50 570 10.80 2 1.38 435 5.96 1 1.24 390 5.36 3 1.24 570 5.40 3.05 2 0.70 435 ▲ ▲ ▲ ▲ 3 1.00 570 4.32 2 0.55 435 2.44 ▲ ▲ ▲ ▲ ▲ All 3-phase, 460V and 575V pumps are 2-speed only.
PAGE 25
UP, UPS Series 200 9 UPS 32-40/4 1 ph, 115 V, 230 V, 60 Hz Curve charts and technical data 9. Curve charts and technical data UPS 32-40/4, 1 ph, 115 V, 230 V, 60 Hz H [ft] 12 H [m] 2 1 10 3 3 8 2 6 4 1 2 0 0 10 0 P1 [hp] P1 [W] 150 0.2 100 0.1 50 0.0 2 20 30 4 6 40 8 50 10 60 Q [US GPM] Q [m³/h] 12 60 Eta [%] 3 1 20 Eta 0 10 20 30 40 1 - 11 ft Motor: 4-pole 0.33 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max.
PAGE 26
UPS 32-40/4 Curve charts and technical data UP, UPS Series 200 9 UPS 32-40/4, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz Flow range: 9 - 52 gpm Head range: 1 - 11 ft 3 Motor: 4-pole 0.33 Hp 2 1 Max. liquid temp (Open): +140 °F H [ft] 12 H [m] 10 3 8 2 6 4 1 2 0 0 10 0 P1 [hp] P1 [W] 150 0.2 100 0.1 50 0.
PAGE 27
UP, UPS Series 200 9 UPS 32-80/2 1 ph, 115 V, 230 V, 60 Hz H [ft] 25 H [m] 4 2 2 1 20 6 3 9 - 67 gpm Head range: 1 - 25 ft Motor: 2-pole 0.50 Hp Max. liquid temp (Open): +140 °F 15 Max. liquid temp.: +248 °F 10 Min. liquid temp.: +32 °F 5 0 0 10 0 P1 [hp] P1 [W] 300 0.4 0.3 200 0.2 100 0.1 0.0 0 0 2 20 4 30 6 40 8 50 10 60 12 70 Q [US GPM] Q [m³/h] 14 1 3 2 40 20 Eta 10 20 30 40 50 60 Eta [%] 0 70 Q [US GPM] 60 Max. system pressure: 145 psi Net wt: 35.
PAGE 28
UPS 32-80/2 Curve charts and technical data UP, UPS Series 200 9 UPS 32-80/2, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [ft] 25 H [m] 20 6 4 2 3 2 1 9 - 67 gpm Head range: 1 - 25 ft Motor: 2-pole 0.50 Hp Max. liquid temp (Open): +140 °F 15 Max. liquid temp.: +248 °F 10 Min. liquid temp.: +32 °F 5 0 0 10 0 P1 [hp] P1 [W] 300 0.4 0.3 200 0.2 100 0.1 0.
PAGE 29
UP, UPS Series 200 9 UPS 32-160/2 1 ph, 115 V, 230 V, 60 Hz H [ft] 50 H [m] 14 12 10 8 6 4 2 0 3 1 2 40 Flow range: 9 - 76 gpm Head range: 1 - 45 ft Motor: 2-pole 0.75 Hp Max. liquid temp (Open): +140 °F 30 Max. liquid temp.: +248 °F 20 Min. liquid temp.: +32 °F 10 0 0 P1 [hp] P1 [W] 800 1.0 600 400 0.5 200 0.
PAGE 30
UPS 32-160/2 Curve charts and technical data UP, UPS Series 200 9 UPS 32-160/2, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [ft] 50 H [m] 14 12 10 8 6 4 2 0 3 40 1 2 Flow range: 9 - 76 gpm Head range: 1 - 45 ft Motor: 2-pole 0.75 Hp Max. liquid temp (Open): +140 °F 30 Max. liquid temp.: +248 °F 20 Min. liquid temp.: +32 °F 10 0 0 0 P1 [hp] P1 [W] 800 1.0 600 400 0.5 200 0.
PAGE 31
UP, UPS Series 200 9 UPS 40-40/4 1 ph, 115 V, 230 V, 60 Hz H [ft] 12 H [m] 3 2 1 10 3 8 2 6 4 1 2 0 0 10 20 30 40 50 60 70 80 90 Q [US GPM] 0 P1 [hp] P1 [W] 300 0.4 0.3 200 0.2 100 0.1 0.0 0 0 2 4 6 8 10 12 14 16 18 20 Q [m³/h] 60 Eta [%] 2 1 40 3 20 Eta 0 10 20 30 40 50 60 70 80 90 Q [US GPM] 13 - 85 gpm Head range: 1 - 11 ft Motor: 4-pole 0.33 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max.
PAGE 32
UPS 40-40/4 Curve charts and technical data UP, UPS Series 200 9 UPS 40-40/4, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [ft] 12 H [m] 3 10 3 1 2 8 2 1 13 - 85 gpm Head range: 1 - 11 ft Motor: 4-pole 0.33 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F 6 Min. liquid temp.: +32 °F 4 Max. system pressure: 145 psi 2 Net wt: 37.7 lbs (17.1 kg) 0 0 10 20 30 40 50 60 70 80 90 Q [US GPM] 0 P1 [hp] P1 [W] 300 0.4 0.3 200 0.2 100 0.
PAGE 33
UP, UPS Series 200 9 UPS 40-80/4 1 ph, 115 V, 230 V, 60 Hz H [ft] 25 H [m] 7 6 5 4 3 2 1 0 3 2 1 20 Flow range: 13 - 120 gpm Head range: 1 - 25 ft Motor: 4-pole 0.50 Hp Max. liquid temp (Open): +140 °F 15 Max. liquid temp.: +248 °F 10 Min. liquid temp.: +32 °F 5 0 20 0 P1 [hp] P1 [W] 600 0.8 0.6 400 0.4 200 0.2 0.0 0 0 5 40 60 10 80 15 100 20 120 25 2 140 Q [US GPM] Q [m³/h] 30 60 Eta [%] 3 40 1 20 Eta 20 40 60 80 100 0 140 Q [US GPM] 120 145 psi Net wt: 57.
PAGE 34
UPS 40-80/4 Curve charts and technical data UP, UPS Series 200 9 UPS 40-80/4, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [ft] 25 H [m] 7 6 5 4 3 2 1 0 3 2 20 1 15 10 5 0 20 0 P1 [hp] P1 [W] 600 0.8 0.6 400 0.4 200 0.2 0.0 0 0 5 40 60 10 80 15 100 20 120 30 3 2 1 20 40 60 80 100 4-pole 0.50 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max. system pressure: 145 psi Net wt: 47.6 lbs (21.
PAGE 35
UP, UPS Series 200 9 UPS 40-80/2 1 ph, 115 V, 230 V, 60 Hz H [m] 8 Flow range: 13 - 105 gpm Head range: 1 - 30 ft Motor: 2-pole 0.75 Hp 20 Max. liquid temp (Open): +140 °F 15 Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F H [ft] 30 25 6 4 1 2 3 10 2 5 0 0 20 0 P1 [hp] P1 [W] 600 0.8 0.6 400 0.4 200 0.2 0.0 0 0 5 40 60 10 80 15 100 20 40 60 80 1.70 ft3 (0.048 m3) Net wt. bronze: 42.8 lbs (19.4 kg) 60 Eta [%] Gross wt. bronze: 50.9 lbs (23.
PAGE 36
UPS 40-80/2 Curve charts and technical data UP, UPS Series 200 9 UPS 40-80/2, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [ft] 30 H [m] 8 25 20 6 3 2 1 15 4 10 2 5 0 0 20 40 0 P1 [hp] P1 [W] 600 0.8 0.6 400 0.4 200 0.2 0.0 0 0 5 60 10 80 15 100 20 120 Q [US GPM] Q [m³/h] 25 60 Eta [%] 40 3 2 1 20 Eta 20 40 60 80 0 120 Q [US GPM] 100 13 - 105 gpm Head range: 1 - 30 ft Motor: 2-pole 0.75 Hp Max. liquid temp (Open): +140 °F Max.
PAGE 37
UP, UPS Series 200 9 UPS 40-160/2 1 ph, 115 V, 230 V, 60 Hz H [ft] 50 H [m] 14 12 10 8 6 4 2 0 40 2 3 1 Flow range: 13 - 110 gpm Head range: 1 - 46 ft Motor: 2-pole 0.75 Hp Max. liquid temp (Open): +140 °F 30 Max. liquid temp.: +248 °F 20 Min. liquid temp.: +32 °F 10 0 20 0 P1 [hp] P1 [W] 1000 750 1.0 500 0.5 250 0.0 0 0 5 40 60 10 80 100 15 20 120 Q [US GPM] 1 Eta 40 60 80 80 Eta [%] 60 40 20 0 120 Q [US GPM] 3 2 20 Q [m³/h] 25 100 145 psi Net wt: 43.2 lbs (19.
PAGE 38
UPS 40-160/2 Curve charts and technical data UP, UPS Series 200 9 UPS 40-160/2, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [m] 14 12 10 8 6 4 2 0 H [ft] 50 3 40 2 1 Flow range: 13 - 110 gpm Head range: 1 - 46 ft Motor: 2-pole 0.75 Hp Max. liquid temp (Open): +140 °F 30 Max. liquid temp.: +248 °F 20 Min. liquid temp.: +32 °F 10 0 0 20 40 0 P1 [hp] P1 [W] 1000 750 1.0 500 0.5 250 0.
PAGE 39
UP, UPS Series 200 9 UPS 40-240/2 1 ph, 230 V, 60 Hz H [m] H [ft] 60 50 15 1 3 2 40 10 30 20 5 10 0 0 20 0 P1 [hp] P1 [W] 2.0 1500 1.5 1000 1.0 500 0.5 0.0 0 0 5 40 60 10 80 15 100 20 120 25 30 40 20 Eta 20 40 60 80 100 Q [m³/h] 60 Eta [%] 3 2 1 140 Q [US GPM] 120 0 140 Q [US GPM] 13 - 130 gpm Head range: 1 - 62 ft Motor: 2-pole 1.5 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max.
PAGE 40
UPS 40-240/2 Curve charts and technical data UP, UPS Series 200 9 UPS 40-240/2, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 20 15 10 5 0 H [ft] 70 60 50 40 30 20 10 0 0 3 1 2 20 0 P1 [hp] P1 [W] 2.0 1500 1.5 1000 1.0 500 0.5 0.0 0 0 40 5 60 10 80 15 100 20 120 25 140 Q [US GPM] 30 3 1 2 40 60 80 100 60 Eta [%] 40 Eta 20 Q [m³/h] 20 0 140 Q [US GPM] 120 Flow range: 13 - 130 gpm Head range: 1 - 62 ft Motor: 2-pole 1.5 Hp Max.
PAGE 41
UP, UPS Series 200 9 UPS 50-40/4 1 ph, 115 V, 230 V, 60 Hz 4 3 2 1 0 2 3 20 0 P1 [hp] P1 [W] 300 0.4 0.3 200 0.2 100 0.1 0.0 0 0 40 5 60 10 80 15 100 20 120 140 Q [US GPM] 25 Q [m³/h] 30 60 Eta [%] 3 2 40 1 20 Eta 20 40 60 80 100 120 0 140 Q [US GPM] Flow range: 20 - 125 gpm Head range: 1 - 12 ft Motor: 4-pole 0.33 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max. system pressure: 145 psi Net wt: 43.7 lbs (19.
PAGE 42
UPS 50-40/4 Curve charts and technical data UP, UPS Series 200 9 UPS 50-40/4, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 4 3 2 1 0 0 P1 [hp] P1 [W] 300 0.4 0.3 200 0.2 100 0.1 0.0 0 0 40 5 60 10 80 15 100 20 120 25 140 Q [US GPM] 30 60 Eta [%] 3 40 2 1 20 Eta 20 40 60 80 Q [m³/h] 100 120 0 140 Q [US GPM] Flow range: 20 - 125 gpm Head range: 1 - 12 ft Motor: 4-pole 0.33 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.
PAGE 43
UP, UPS Series 200 9 UPS 50-80/4 1 ph, 115 V, 230 V, 60 Hz H [ft] 25 H [m] 7 6 5 4 3 2 1 0 3 20 2 1 15 10 5 0 0 P1 [hp] P1 [W] 1000 800 1.0 600 400 0.5 200 0.0 0 0 20 40 60 80 100 120 140 160 180 Q [US GPM] 5 10 15 20 25 30 35 40 Q [m³/h] 50 Eta [%] 40 3 2 30 1 20 Eta 10 0 20 40 60 80 100 120 140 160 180 Q [US GPM] 20 - 160 gpm Head range: 1 - 24 ft Motor: 4-pole 0.75 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max.
PAGE 44
UPS 50-80/4 Curve charts and technical data UP, UPS Series 200 9 UPS 50-80/4, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [ft] 25 H [m] 7 6 5 4 3 2 1 0 20 3 2 1 Flow range: 20 - 160 gpm Head range: 1 - 24 ft Motor: 4-pole 0.75 Hp Max. liquid temp (Open): +140 °F 15 Max. liquid temp.: +248 °F 10 Min. liquid temp.: +32 °F 5 0 20 40 60 80 100 120 140 160 180 Q [US GPM] 0 P1 [hp] P1 [W] 1000 800 1.0 600 400 0.5 200 0.
PAGE 45
UP, UPS Series 200 9 UPS 50-80/2 1 ph, 115 V, 230 V, 60 Hz H [ft] 35 30 25 20 15 10 5 0 0 10 8 6 4 2 0 3 2 1 20 0 P1 [hp] P1 [W] 800 1.0 600 400 0.5 200 0.0 0 0 5 20 40 60 10 80 100 120 140 160 Q [US GPM] 15 40 60 20 25 30 Q [m³/h] 35 80 Eta [%] 60 3 2 40 1 20 Eta 0 80 100 120 140 160 Q [US GPM] Flow range: 20 - 150 gpm Head range: 1 - 30 ft Motor: 2-pole 0.75 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max.
PAGE 46
UPS 50-80/2 Curve charts and technical data UP, UPS Series 200 9 UPS 50-80/2, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 10 8 6 4 2 0 3 2 1 0 P1 [hp] P1 [W] 800 1.0 600 400 0.5 200 0.0 0 0 20 40 5 10 20 40 60 80 100 120 140 160 Q [US GPM] 15 20 25 30 35 Q [m³/h] 80 Eta [%] 3 60 40 2 1 Eta 20 0 80 100 120 140 160 Q [US GPM] 60 Flow range: 20 - 150 gpm Head range: 1 - 30 ft Motor: 2-pole 0.75 Hp Max. liquid temp (Open): +140 °F Max.
PAGE 47
UP, UPS Series 200 9 UPS 50-160/2 1 ph, 230 V, 60 Hz H [ft] 50 H [m] 14 12 10 8 6 4 2 0 3 2 1 40 Flow range: 20 - 170 gpm Head range: 1 - 46 ft Motor: 2-pole 1.50 Hp Max. liquid temp (Open): +140 °F 30 Max. liquid temp.: +248 °F 20 Min. liquid temp.: +32 °F 10 0 0 20 40 60 80 100 120 140 160 180 Q [US GPM] 0 P1 [hp] P1 [W] 2.0 1500 1.5 1000 1.0 500 0.5 0.0 0 0 5 10 15 20 25 30 35 40 Q [m³/h] 60 Eta [%] 3 145 psi Net wt: 53.6 lbs (24.3 kg) Gross wt.: 65.9 lbs (29.
PAGE 48
UPS 50-160/2 Curve charts and technical data UP, UPS Series 200 9 UPS 50-160/2, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575, 60 Hz H [m] 14 12 10 8 6 4 2 0 H [ft] 50 40 3 2 1 Flow range: 20 - 170 gpm Head range: 1 - 46ft Motor: 2-pole 1.50 Hp Max. liquid temp (Open): +140 °F 30 Max. liquid temp.: +248 °F 20 Min. liquid temp.: +32 °F 10 0 0 P1 [hp] P1 [W] 2.0 1500 1.5 1000 1.0 500 0.5 0.
PAGE 49
UP, UPS Series 200 9 UPS 50-240/2 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [ft] 70 3 60 2 50 1 40 30 20 10 0 0 20 40 60 80 100 120 140 160 180 Q [US GPM] 20 15 10 5 0 0 P1 [hp] P1 [W] 2000 2 1500 1000 1 500 0 0 0 5 10 15 20 25 30 35 40 Q [m³/h] 80 Eta [%] 60 3 2 40 1 Eta 20 0 20 40 60 80 100 120 140 160 180 Q [US GPM] Flow range: 20 - 180 gpm Head range: 1 - 62 ft Motor: 2-pole 2.00 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max.
PAGE 50
UPS 53-55/57 Curve charts and technical data UP, UPS Series 200 9 UPS 53-55/57, 1 ph, 115 V, 230 V, 60 Hz 1 ph, 115 V, 230 V, 60 Hz 10 8 6 4 2 0 H [ft] 35 30 25 20 15 10 5 0 0 3 2 1 20 0 P1 [hp] P1 [W] 800 1.0 600 400 0.5 200 0.0 0 0 5 20 40 60 10 40 80 100 120 140 160 Q [US GPM] 15 20 25 30 35 Q [m³/h] 80 Eta [%] 60 3 2 40 1 20 Eta 0 80 100 120 140 160 Q [US GPM] 60 Flow range: 20 - 150 gpm Head range: 1 - 30 ft Motor: 4-pole 0.75 Hp Max. liquid temp (Open): +140 °F Max.
PAGE 51
UP, UPS Series 200 9 UPS 53-55/57 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 10 8 6 4 2 0 3 2 1 0 P1 [hp] P1 [W] 800 1.0 600 400 0.5 200 0.0 0 0 20 40 5 10 20 40 60 80 100 120 140 160 Q [US GPM] 15 20 25 30 35 Q [m³/h] 80 Eta [%] 3 60 40 2 1 Eta 20 0 80 100 120 140 160 Q [US GPM] 60 Flow range: 20 - 150 gpm Head range: 1 - 30 ft Motor: 2-pole 0.75 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max.
PAGE 52
UPS 75-69/2 Curve charts and technical data UP, UPS Series 200 9 UPS 75-69/2, 1 ph, 230 V, 60 Hz 1 ph, 230 V, 60 Hz H [ft] 50 H [m] 14 12 10 8 6 4 2 0 3 2 1 40 Flow range: 20 - 170 gpm Head range: 1 - 46 ft Motor: 2-pole 1.25 Hp Max. liquid temp (Open): +140 °F 30 Max. liquid temp.: +248 °F 20 Min. liquid temp.: +32 °F 10 0 0 20 40 60 80 100 120 140 160 180 Q [US GPM] 0 P1 [hp] P1 [W] 2.0 1500 1.5 1000 1.0 500 0.5 0.
PAGE 53
UP, UPS Series 200 9 UPS 75-69/2 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [ft] 50 H [m] 14 12 10 8 6 4 2 0 40 3 2 1 Flow range: 20 - 170 gpm Head range: 1 - 46 ft Motor: 2-pole 1.25 Hp Max. liquid temp (Open): +140 °F 30 Max. liquid temp.: +248 °F 20 Min. liquid temp.: +32 °F 10 Max. system pressure: 145 psi Net wt: 53.6 lbs (24.3 kg) 0 0 20 40 60 80 100 120 140 160 180 Q [US GPM] 0 P1 [hp] P1 [W] 2.0 1500 1.5 1000 1.0 500 0.5 0.
PAGE 54
UPS 80-40/4 Curve charts and technical data UP, UPS Series 200 9 UPS 80-40/4, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 4 3 2 1 0 3 2 1 40 0 P1 [hp] P1 [W] 600 0.8 0.6 400 0.4 200 0.2 0.0 0 0 80 10 120 20 160 30 200 Q [US GPM] Q [m³/h] 40 60 Eta [%] 1 40 80 120 2 3 40 Eta 20 0 200 Q [US GPM] 160 Flow range: 30 - 200 gpm Head range: 1 - 13 ft Motor: 4-pole 0.5 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min.
PAGE 55
UP, UPS Series 200 9 UPS 80-80/4 3 ph, 208-230 V, 60 Hz H [ft] 30 25 3 20 2 1 15 10 5 0 0 50 0 P1 [hp] P1 [W] 1.5 1200 800 1.0 400 0.5 0.0 10 100 20 150 30 200 40 250 50 300 Q [US GPM] Q [m³/h] 60 60 Eta [%] 3 1 40 2 Eta 0 0 50 100 150 200 250 20 0 300 Q [US GPM] Flow range: 30 - 260 gpm Head range: 1 - 25 ft Motor: 4-pole 1.50 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max. system pressure: 145 psi Net wt: 89.
PAGE 56
UP 80-160/2 Curve charts and technical data UP, UPS Series 200 9 UPS 80-160/2, 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 3 ph, 208-230 V, 460 V, 575 V, 60 Hz H [ft] 50 H [m] 14 12 10 8 6 4 2 0 3 40 1 2 30 - 275 gpm Head range: 1 - 49 ft Motor: 2-pole 3.00 Hp Max. liquid temp (Open): +140 °F 30 Max. liquid temp.: +248 °F 20 Min. liquid temp.: +32 °F 10 Max. system pressure: 145 psi Net wt: 85.1 lbs (38.
PAGE 57
UP, UPS Series 200 9 UP 100-40/4 3 ph, 208-230 V, 460 V, 575 V, 60 Hz 4 3 2 1 0 3 2 1 50 0 P1 [hp] P1 [W] 600 0.8 0.6 400 0.4 200 0.2 0.0 0 0 100 10 20 150 30 200 40 250 50 300 Q [US GPM] Q [m³/h] 60 60 Eta [%] 3 2 1 40 Eta 50 100 150 200 20 0 300 Q [US GPM] 250 Flow range: 30 - 270 gpm Head range: 1 - 12 ft Motor: 4-pole, 1.00 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +248 °F Min. liquid temp.: +32 °F Max. system pressure: 145 psi Net wt: 126.
PAGE 58
UP 43-70 Curve charts and technical data UP, UPS Series 200 9 UP 43-70, 1 ph, 115 V / 230 V, 60 Hz 1 ph, 115 V / 230 V, 60 Hz 8 6 4 2 0 P1 [hp] 0.6 0.4 0.2 0.0 H [ft] 28 24 20 16 12 8 4 0 0 10 20 30 40 50 60 70 80 90 100 Q [US GPM] 0 P1 [W] 500 400 300 200 100 0 0 5 10 15 20 Flow range: 15 - 100 gpm Head range: 1 - 23 ft Motor: 2-pole 0.50 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +230 °F Min. liquid temp.: +32 °F Max. system pressure: 145 psi Net wt: 33.1 lbs (15.
PAGE 59
UP, UPS Series 200 9 UP 43-110 1 ph, 115 V / 230 V, 60 Hz 10 8 6 4 2 0 P1 [hp] 1.2 0.8 0.4 0.0 H [ft] 40 35 30 25 20 15 10 5 0 0 10 20 30 40 50 60 70 80 90 100110 Q [US GPM] 0 5 10 15 20 Q [m³/h] P1 [W] 1000 50 Eta [%] 800 40 600 30 P1 400 20 Eta 200 10 0 0 0 10 20 30 40 50 60 70 80 90 100110 Q [US GPM] Flow range: 15 - 105 gpm Head range: 1 - 37 ft Motor: 2-pole 0.75 Hp Max. liquid temp (Open): +140 °F Max. liquid temp.: +230 °F Min. liquid temp.: +32 °F Max.
PAGE 60
UP 53-45 Curve charts and technical data UP, UPS Series 200 9 UP 53-45, 1 ph, 115 V / 230 V, 60 Hz 1 ph, 115 V / 230 V, 60 Hz H [m] Flow range: 15 - 100 gpm Head range: 1 - 23 ft 20 Motor: 2-pole 0.50 Hp 16 Max. liquid temp (Open): +140 °F 12 Max. liquid temp.: +230 °F Min. liquid temp.: +32 °F H [ft] 24 6 4 8 2 4 0 0 0 10 20 30 40 50 60 70 80 90 100110 Q [US GPM] 0.6 0.4 0.2 0.0 145 psi Net wt: 44.4 lbs (20.2 kg) Gross wt.: 63.5 lbs (23.8 kg) Shipping volume: 2.10 ft3 (0.
PAGE 61
UP, UPS Series 200 9 UP 53-46 1 ph, 115 V / 230 V, 60 Hz H [m] Flow range: 15 - 105 gpm Head range: 1 - 37 ft 20 Motor: 2-pole 0.75 Hp 16 Max. liquid temp (Open): +140 °F H [ft] 24 6 4 12 8 2 4 0 0 0 10 20 30 40 50 60 70 80 90 100110 Q [US GPM] 0.6 0.4 0.2 0.0 +230 °F Min. liquid temp.: +32 °F Max. system pressure: 145 psi Net wt: 44.5 lbs (20.2 kg) Gross wt.: 63.5 lbs (23.8 kg) Shipping volume: 2.10 ft3 (0.06 m3) Net wt. bronze: 49.2 lbs (22.3 kg) Gross wt. bronze: 57.
PAGE 62
UP, UPS Series 200 10 Accessories and spare parts 10. Accessories and spare parts Packaged fitting sets Pump connection Pipe connection type & size Product number Approx. ship. wt. (lb/oz.) 3/4 519601 2 lb 4 oz. 1 519602 2 lb 4 oz. 1-1/4 519603 2 lb 2 oz. NPT Flange sets Cast iron GF 15/26 flange 1-1/2 519604 2 lb 2 oz. 1-1/2 539605 2 lb 7 oz. 2 96409354 6.
PAGE 63
UP, UPS Series 200 11 Further documentation 11. Further documentation WebCAPS WebCAPS is a Web-based Computer Aided Product Selection program available on www.grundfos.com. WebCAPS contains detailed information on more than 185,000 Grundfos products in more than 20 languages. In WebCAPS, all information is divided into 6 sections: • Catalog • Literature • Service • Sizing • Replacement • CAD drawings.
PAGE 64
UP, UPS Series 200 11 Further documentation Sizing 0 1 This section is based on different fields of application and installation examples, and gives easy step-by-step instructions in how to • select the most suitable and efficient pump for your installation • carry out advanced calculations based on energy consumption, payback periods, load profiles, life cycle costs, etc. • analyse your selected pump via the built-in life cycle cost tool • determine the flow velocity in wastewater applications, etc.
PAGE 65
PAGE 66
PAGE 67
PAGE 68
Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence Subject to alterations. L-UPS-PG-01 0612 The name Grundfos, the Grundfos logo, and the payoff Be–Think–Innovate are registrated trademarks owned by Grundfos Management A/S or Grundfos A/S, Denmark. All rights reserved worldwide. ECM: - GRUNDFOS Pumps Corporation 17100 West 118th Terrace Olathe, Kansas 66061 Phone: +1-913-227-3400 Telefax: +1-913-227-3500 GRUNDFOS Canada Inc.