GRUNDFOS SUMP, SEWAGE AND EFFLUENT Products and Accessories
GRUNDFOS SUMP PUMPS AP12 KP 150 250 350 MATERIALS OF CONSTRUCTION APPLICATIONS Stainless Steel • Basement Sumps • Dewatering • Water transfer FEATURES & BENEFITS PUMP MODELS KP150 • 1/4 hp, 115 volt, 1-phase KP250 • 1/3 hp, 115 volt, 1-phase KP350 • 1/2 hp, 115 volt, 1-phase SPECIFICATIONS • Capacity to 62 GPM • Heads to 31 feet • Discharge size 1-1/4” female NPT • Power Cord 10’ or 25’ • Solids 3/8” maximum 32 • Lightweight • Corrosion resistant • Manual or automatic operation • Field replaceable
GRUNDFOS SUMP PUMPS SU25 SERIES II SU APPLICATIONS • Basement Sumps • Water transfer PUMP MODELS FEATURES & BENEFITS • Lightweight • Corrosion resistant • Manual or automatic operation • Swing or vertical switch options • Impact resistant • Continuous duty when fully submerged • Fluid Temp. Range: 40°F (4.4°C) min. 120°F (48.9°C) max.
GRUNDFOS EFFLUENT PUMPS EF25 SERIES II EF APPLICATIONS • Graywater pumping • Septic Tanks Effluent • STEP Systems • Water transfer • Basement Sumps MATERIALS OF CONSTRUCTION Engineered Composite FEATURES & BENEFITS • Graywater pumping • Septic Tanks Effluent • STEP Systems • Water transfer • Dewatering • Basement Sumps • Lightweight • Corrosion resistant • Manual or automatic operation • Swing or vertical float option • Impact resistant SPECIFICATIONS • Continuous duty • 1/4 hp, 115 volt, 1-phase when
GRUNDFOS EFFLUENT PUMPS EF33E EF • Capacity to 120 GPM • Heads to 90 feet • Discharge size 2” female NPT • Power cord 10’ or 20’ • Solids 3/4” maximum MATERIALS OF CONSTRUCTION MATERIALS OF CONSTRUCTION Stainless Steel Engineered Composite FEATURES & BENEFITS • Lightweight • Corrosion resistant • Manual or automatic operation • Field replaceable power cords • Continuous duty when fully submerged • Fluid Temp. Range: 32°F (0°C) min. 104°F (40°C) max.
GRUNDFOS SEWAGE PUMPS SE APPLICATIONS • Home Wastewater Systems • Sewage Systems • Light Commercial • Water transfer PUMP MODELS SE40 = 4/10 hp, 115 or 230 volt, 1-phase SE50 = 1/2 hp, 115 or 230 volt, 1-phase SE75 = 3/4 hp, 230 volt, 1-phase SE100 = 1 hp, 230 volt, 1-phase SE150 = 1-1/2 hp, 230 volt, 1-phase SPECIFICATIONS • Capacity to 170 GPM • Heads to 47.
GRUNDFOS PACKAGED SYSTEMS SINK-PAQ™ E-PAQ™ MATERIALS OF CONSTRUCTION MATERIALS OF CONSTRUCTION Pump: Stainless Steel Engineered Composite Basin & Cover: Polypropylene Discharge Pipe: PVC (included) Check Valve: PVC (included) • Laundry trays • Bar sinks FEATURES & BENEFITS • Drinking fountains • Lightweight • Dehumidifiers • Corrosion resistant • Air conditioning condensate • Automatic operation • Compact size: Able to put SPECIFICATIONS sinks where there are no SU332AV drains, no need to break • 1/3 hp
GRUNDFOS CONTROL PANELS Simplex Panel Duplex Panel Standard Features LISTING: Underwriters Laboratories, UL 508. RATINGS: Model S1 rated up to 120 VAC, 1 Hp, 16 A, Single Phase, 60 Hz. Model S2 rated at 230 VAC, 1-1/2 Hp, 16 A, Single Phase, 60 Hz. MOTOR-START CONTRACTOR: Rated for 24 FLA, Single Phase, 60 Hz. CURRENT LIMITING CIRCUIT BREAKER: 20 amp, OFF/ON switch, DIN rail mounting with thermal magnetic tripping characteristics.
GRUNDFOS HIGH LEVEL TANK ALARMS Tank Alert 4X Tank Alert AB Dimensional Drawing Dimensional Drawing Side View Specifications Specifications MODEL: Tank Alert AB ALARM PANEL: The NEMA 1 plastic panel features a red alarm light, a green “power on” light, alarm “test” switch, and a horn silence switch. FLOAT SWITCH: SJE’s SignalMaster® control switch with mounting clamp.
GRUNDFOS BASINS Ejector Basin/Polyethylene Ejector Basin/Fiberglass Dimensional Drawing Dimensional Drawing * see note 1. Polyethylene Basin Fiberglass Basin *1. 18” and 24” Basin provided with 4” Adapt-A-Flex Fitting. 2. Fiberglass Basins require that a hole be cut for inlet fitting. See Hubs and Fittings (page 4) for proper hole sizing.
GRUNDFOS HUBS AND FITTINGS Caulking Hubs Adapt-A-Flex Fittings Dimensional Drawing Dimensional Drawing Four 5/16” mounting holes Size: 3”, 4” & 6” (for Fiberglass Basins) Four 5/16” mounting holes Size: 4” only (for Polyethylene Basins) Size: 3”, 4” & 6” Dimensions Part Number Type Sizes Available A B C D E F 96001507 96001508 96001509 96001510 96001504 96001505 96001506 Hub Hub Hub Hub Fitting Fitting Fitting 3” 4” 6” 4” 3” 4” 6” 43/4” 6” 8” 53/4” 15 3 /32” 415/32” 623/32” 25/8” 33/8”
GRUNDFOS BASIN COVERS Dimensional Drawings Simplex Simplex with Pump Access Duplex with Inspection and Pump Access Simplex with Inspection and Pump Access Dimensions Part Number Cover Type 96001008 96001009 96001012 96001013 96001016 96001017 96001020 96001021 96001024 96001025 96001028 96001029 simplex Basin Size I.D. Standard Bolt Circle -Holes A Cover O.D. B Pump Access I.D. C Discharge Size D Vent Size E Inspection I.D.
GRUNDFOS JUNCTION BOX Dimensional Drawing Specifications MATERIALS: Lid and box are made from a flame retardant, ultra-violet resistant, reinforced PVC. GASKET: Polyethylene foam. SCREWS: 304 stainless steel.
Being responsible is our foundation Thinking ahead makes it possible Innovation is the essence L-SE-SL-001 Rev. 03/04 PRINTED IN USA Grundfos Pumps Corporation 17100 W. 118th Terrace Olathe, Kansas 66061 Telephone: (913) 227-3400 www.grundfos.com Grundfos Canada, Inc. 2941 Brighton Rd. Oakville, Ontario L6H 6C9 Telephone: (905) 829-9533 Fax: (905) 829-9512 Bombas Grundfos de Mexico, S.A. de C.V. Boulevard TLC #15, Parque Industrial Stiva Aeropuerto C.P. 66600 Apodaca, N.L.