Submittal Sheet

General data, Unilift
Unilift CC, KP, AP
2
6
Type keys
Unilift CC pumps
Unilift KP pumps
Unilift AP pumps
Construction
Vertical, single-stage, submersible centrifugal pumps
with horizontal or vertical discharge port designed for
free-standing installation or for installation in collecting
tanks.
The pumps are directly connected to an asynchronous
submersible motor for 1 x 115 V + 6/- 10 %,
1 x 230 V + 6/- 10 %, 60 Hz.
Enclosure class: IP68
Insulation class: B or F.
Unilift pumps
Single-phase pumps incorporate thermal overload
protection and require no additional motor protection.
Installation
The pumps are suitable for free-standing installation.
Pumps for vertical dry tank installation can be installed
by means of a stationary stand with suction bend.
Follow current local electrical codes or national electric
codes (NEC) for electrical connection of pumps.
Example Unilift CC 9 A1
Type range
Type
Maximum head [m]
5
7
9
Operation:
A1 = Automatic operation
M1 = Manual operation
Example Unilift KP 150 A 1
Type range
Rated motor output, P
2
[W]:
150
250
350
Level control:
S = with integrated, electronic sensor (automatic operation)
A = with float switch (automatic operation)
M = without level switch (manual operation)
Motor:
1 = single-phase
3 = three-phase
Example Unilift AP 35 B. 50. 08. A 1 .V
Type range
Maximum solids size (mm)
Pump type:
Blank = AP pump
B = AP Basic
Nominal diameter of discharge port
Power output P
2
/100 [W]
Level control:
A = Automatic operation (with float switch)
Blank = Manual operation (without float switch)
Motor:
1 = Single-phase
3 = Three-phase
Impeller:
V = Vortex impeller