Submittal Sheet

Product overview, Unilift
Unilift CC, KP, AP
1
3
1. Product overview, Unilift
Application Technical data Sizing
Drainage
Unilift CC
Unilift CC is a submersible pump designed for pumping
clean, non-aggressive water and slightly dirty (grey)
wastewater. Unilift CC can pump down to 0.12" water level
and can be used in permanent installations or as a portable
pump.
GR A0682
• Max. flow rate, Q: 62 GPM
• Max. head, H: 30.8 feet
• Liquid temp.: 32 °F to 104 °F
• Max. particle size: 0.4"
• Material: Composite
• Suction down to 0.12".
TM04 3028 3508
Unilift KP
Unilift KP is a submersible pump designed for pumping
clean, non-aggressive water and slightly dirty (grey)
wastewater such as domestic effluents from septic and
sludge treating systems.
GR 0111
• Max. flow rate, Q: 65 GPM
• Max. head, H: 32 feet
• Liquid temp.: 32 °F to 122 °F
• Max. particle size: 0.4"
• Material: Stainless steel.
TM04 3029 3508
Unilift AP12
Unilift AP12 is a submersible pump designed for pumping
clean, non-aggressive water and slightly dirty (grey)
wastewater. The pump can be used as a portable unit.
TM03 7213
• Max. flow rate, Q: 140 GPM
• Max. head, H: 52 feet
• Liquid temp.: 32 °F to 131 °F
• Max. particle size: 0.4"
• Material: Stainless steel.
TM04 3030 3508
Effluent
Unilift AP35
Unilift AP35 is a submersible pump designed for pumping
dirty water, untreated wastewater (excluding toilet
discharge) and liquids containing fibers from light industry,
laundries, etc. with particles up to 1.4".
GR0115
• Max. flow rate, Q: 79 GPM
• Max. head, H: 39 feet
• Liquid temp.: 32 °F to 131 °F
• Max. particle size: 1.4"
• Material: Stainless steel.
TM04 3031 3508
Unilift AP35B
Unilift AP35B is a submersible pump designed for pumping
effluents (excluding toilet discharge). The pump is suitable
for installation on auto coupling; this allows easy access to
the pump for maintenance and other purposes.
TM03 8260 0907
• Max. flow rate, Q: 92 GPM
• Max. head, H: 43 feet
• Liquid temp.: 32 °F to 104 °F
• Max. particle size: 1.4"
• Material: Stainless steel
TM034 3033 3508
Domestic sewage
Unilift AP50
Unilift AP50 is a submersible pump designed for pumping
dirty water, untreated wastewater and liquids containing
fibers from light industry, laundries, etc. with particles up to
2.0".
GR0117
• Max. flow rate, Q: 140 GPM
• Max. head, H: 41 feet
• Liquid temp.: 32 °F to 131 °F
• Max. particle size: 2.0"
• Material: Stainless steel.
TM04 3032 3508
Unilift AP50B
Unilift AP50B is a submersible pump designed for pumping
effluents. The pump is suitable for installation on auto-
coupling allowing easy access to the pump for maintenance
and other purposes.
TM03 8260 0907
• Max. flow rate, Q: 136 GPM
• Max. head, H: 49 feet
• Liquid temp.: 32 °F to 104 °F
• Max. particle size: 2.0"
• Material: Stainless steel
TM04 3034 3508