Submittal Sheet

Technical data and performance curves
Unilift CC, KP, AP
3
25
Unilift AP35B
Product description
Fig. 19 Unilift AP35B
The Unilift AP35B pump is a single-stage submersible
pump designed for pumping effluent.
The pump is suitable for these applications:
• groundwater lowering
• pumping in drainage collecting tanks
• pumping in surface water collecting tanks with
inflow from roof gutters, shafts, tunnels, etc.
• emptying of ponds, tanks, etc.
• pumping of fibre-containing effluent from laundries
and industries
• pumping of domestic effluent from septic tanks and
sludge treating systems
• pumping of domestic effluent without discharge from
water closets.
Maximum particle size: 1.4"
Liquid temperature range: 32 °F to 104 °F.
Approvals
Operation
The pump can be used for automatic as well as
manual operation and can be installed in a permanent
installation or used as a portable pump.
To enable automatic operation the pump can be fitted
with a float switch or it can be connected to separate
level switch and control box for automatic on/off
operation.
Pump housing
Pump housing with an outstanding design for
submersible wastewater pumps, resulting in a high
head.
The pump housing is made of a steel tube with a
smooth surface and a hydraulically correct shape
ensuring free passage of particles.
Ring stand, pump inlet and pump housing are fastened
to the motor by means of four springs enabling quick
and easy dismantling.
Discharge port
All Unilift AP35B pumps have a threaded 2" NPT
horizontal discharge port.
Shaft and bearings
The stainless steel shaft rotates in maintenance-free
prelubricated ball bearings.
Impeller
The stainless steel impeller is a vortex impeller with
L-shaped blades and a clearance of 1.4" in the pump
housing. The blades are curved backwards to reduce
any harmful effect from solid particles and to minimize
power consumption. The impeller has a protective cap
to prevent the deposit of long-fibered material.
Fig. 20 Impeller, Unilift AP35B
Shaft seal
The shaft seal is a combination of a mechanical,
bellows shaft seal and a lip seal with 2.7 fl.oz. oil
between. Seal faces are made of silicone carbide.
TM03 8260 0907
US
C
TM00 5478 0895