UPS26-150SF Specifications Guide

ManualsBrandsGrundfos ManualsCirculator PumpsUPS26-150SF 3-Speed Stainless Steel Circulator Pump 115V, 1/3 HP

Company name:

Created by:

Phone:

Fax:

Date:

Printed from Grundfos CAPS [2011.05.069]

Position Count Description Unit price

-1 On

request

UPS 26-150 SF

Product photo could vary from the actual product

Product No.: 95906632

The pump is of the canned rotor type, i.e. pump

and motor form an integral unit without shaft

seal and with only two gaskets for sealing.

The bearings are lubricated by the pumped liquid.

The pump is characterized by:

* Ceramic shaft and radial bearings.

* Carbon axial bearing.

* Stainless steel rotor can and bearing plate.

* Corrosion-resistant impeller, Composite, PES.

* Stainless steel pump housing.

The motor is a 1-phase motor.

No additional motor protection is required.

Liquid:

Liquid temperature range: 32 .. 230 °F

Density: 62.4 lb/ft³

Technical:

Maximum operating pressure: 145 psi

Approvals on nameplate: ETL, CSA

Materials:

Pump housing: Stainless steel

DIN W.-Nr. 1.4301

Impeller: Composite, PES

Installation:

Maximum ambient temperature: 104 °F

Ambient max at 176°F liquid: 176 °F

Maximum operating pressure: 145 psi

Flange standard: USA Oval

Type of connection: S.S. Flange

Pipe connection: 2 - Bolt Flange

Pressure stage: 10

1/4

Summary of content (4 pages)

PAGE 1
Company name: Created by: Phone: Fax: Date: Position Count -1 - Description Unit price UPS 26-150 SF On request Product photo could vary from the actual product Product No.: 95906632 The pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid. The pump is characterized by: * Ceramic shaft and radial bearings. * Carbon axial bearing.
PAGE 2
Company name: Created by: Phone: Fax: Date: Position Count Description Unit price Port-to-port length: 6 1/2 in Electrical data: Number of poles: Power input in speed 1: Power input in speed 2: Max. power input: Rated power - P2: Main frequency: Rated voltage: Current in speed 1: Current in speed 2: Current in speed 3: Capacitor size - run: Insulation class (IEC 85): 2 265 W 335 W 370 W 0.335 HP 60 Hz 1 x 115 V 2.5 A 3.1 A 3.5 A 40 µF/180 V H Others: Gross weight: 16.
PAGE 3
Company name: Created by: Phone: Fax: Date: Description Product name: Product Number: EAN number: Value UPS 26-150 SF 95906632 5700313291700 Technical: Speed Number: Max flow: Head max: Maximum operating pressure Approvals on nameplate: 3 52 US gpm 45.3 ft 145 psi ETL, CSA H (ft) 40 UPS 26-150 SF, 60 Hz Density = 62.4 lb/ft³ 30 Liquid: Liquid temperature range Density: 32 .. 230 °F 62.4 lb/ft³ Electrical data: Number of poles: Power input in speed 1: Power input in speed 2: Max.
PAGE 4
Company name: Created by: Phone: Fax: Date: - 95906632 UPS 26-150 SF 60 Hz 7 1/8" 3 1/8" 3 7/8" 3 3/4" 6 1/2" 5 7/8" Note! All units are in [mm] unless others are stated. Disclaimer: This simplified dimensional drawing does not show all details. Printed from Grundfos CAPS [2011.05.