User Guide

17
12. Setting by means of R100
The pump is designed for wireless communication with the
Grundfos remote control R100.
Fig. 27 R100 communicating with the pump via infra-red light
During communication, the R100 must be pointed at the control
panel. When the R100 communicates with the pump, the red
indicator light will flash rapidly.
The R100 offers additional possibilities of setting and status
displays for the pump.
The displays are divided into four parallel menus, fig. 28:
0. GENERAL (see operating instructions for the R100)
1. OPERATION
2. STATUS
3. INSTALLATION
The number stated at each individual display in fig. 28 refers to
the section in which the display is described.
Fig. 28 Menu overview
TM02 0936 0501
1. OPERATION 2. STATUS 3. INSTALLATION
12.1.1 12.2.1
12.2.2
12.2.3
12.2.4
12.2.5
12.2.6
12.3.1
12.3.2
12.3.3
12.3.4
12.3.5
0. GENERAL
12.1.4
12.1.2
12.1.3
Grundfos.bk Page 17 Thursday, November 11, 2010 11:21 PM