Specification

Applications
UP Series
5
31
MixiMizer - mixing reset pump
The Grundfos MixiMizer, a fully integrated injection
pump and indoor/outdoor controller, is the only pump
and controller system of its kind.
Equipped with a weather responsive control, also
known as indoor/outdoor control or reset control, the
MixiMizer automatically calculates and controls mixed
water temperatures according to outdoor temperatures
in primary/secondary piping systems. The control also
provides pump exercising for 10 seconds every three
days and a 20 second postpurge when the heat
demand ceases.
For maximum design flexibility, the MixiMizer can be
integrated into a thermostat or zoning control system
through the user-selectable "external call for heat/
demand input".
A fully serviceable check valve integrated into the
pump housing eliminates ghost flows in primary/
secondary injection systems and zone applications.
LEDs located on the terminal box are designed to
indicate performance and diagnose faults without
tools.
Other standard user-selectable features include boiler
protection, system/slab "overtemperature" control and
a 5 °F parallel shift of the heating curve.
Fig. 3 MixiMizer
MixiMizer models includes the following:
• Two water-temperature sensors (system supply and
return) prewired, 8 ft (2.4 m) each
• Line cord, 6 ft (1.8 m) prewired
• One outdoor air-temperature sensor
• Two flange gaskets
• Optional zone control input
• Optional boiler On/Off output.
Standard features
• Variable-speed output modulation
• System supply-temperature sensor 140 °F
(60 °C) max.
• Boiler return-temperature sensor 135 °F
(57 °C) min.
• Heating curve can be adjusted by 5 °F in parallel
• Pump exercising every three days of no operation.
Fig. 4 Family curves for MixiMizer
TM04 9735 5110
TM03 8844 2607
Position Description
a Min. curve for all models
b Max. UP 15-42 BUC5
c Max. UP 15-42 BUC7
d Max. UP 15-42 FC
0 2 4 6 8 10 12 14 16 18
Q[US GPM]
0
2
4
6
8
10
12
14
16
[ft]
H
a
a
b
c
d