Owner's Manual

Built in the U.S.A.
5
1
3
2
4
Turn water on slowly.
5
Connect the 3/8 tubing to the
quick connect tting on the outlet
side of your mini-SCRUB
Connect your Garden hose to the
Garden hose tting.
Insert the 3/8” tubing to the
garden hose connector.
Insert the other end of the 3/8”
tubing to the inlet tting of the
mini-SCRUB .
The Mini-Scrub de-chlorinator is designed to be used between 1-80
psi of incoming water pressure.
Do not exceed 80 psi of incoming water pressure.
If incoming water pressure is too high, install pressure regulator before
unit.
Pressure regulators are available at www.GrowoniX.com
Always turn incoming water pressure on slowly, allowing all air to be
discharged before full water pressure is restored.
SETUP INSTRUCTIONS