Owner's Manual
Cut the tubing to the appropriate length
(ensure no kinks or ow restrictions), and
insert into the 1/2” pump input. Install the
1/2” locking clip.
Insert the supplied 3/8” tubing into the
pump high pressure output. Install the
3/8” locking cip.
3 4
Slide the 1/2” locking clip o of the
carbon lter output tting, and remove
the short length of 1/2” tubing feeding
the membrane input.
Insert the supplied 1/2” tubing into the
carbon lter output. Install the 1/2”
locking cip.
1 2
SETUP INSTRUCTIONS FOR BP-6010
IMPORTANT TIPS:
TURN OFF INCOMING WATER SUPPLY AND DRAIN SYSTEM PRESSURE BEFORE INSTALLING
A BP-6010 PUMP
8
Built in the U.S.A.