Owner's Manual

• The motor is a carbonator motor. It is available in 110/220 and 50/60 hertz 1 phase 5.6A. Please

ensure that the electrical circuit supplying the system is compatible with the requirements of the

BP-6010 pump. Each BP-6010 pump is equipped with an 8” electrical cord.

TO REDUCE THE RISK OF ELECTRICAL SHOCK, THE INCOMING POWER SUPPLY MUST INCLUDE

A PROTECTIVE EARTH GROUND.

• Do not use garden hose ttings or attachements when using a BP-6010 series pump, especially

when using an ESOK (electric shuto kit). It is only recomended to plumb he RO system with

appropriate SCH40/80 PVC, copper, or CTS pipe suitable to pass local plumbing inspections

in your area.

• Any restrictions or blockage in the drain line of the ro system can cause back pressure, which will

increase the systems operating pressure. this can result in damage to the system’s membranes

and components and a potentially DANGEROUS OVERPRESSURIZATION CONDITION.

• The input to the BP-6010 pump is 1/2 OD” tubing size.

• The output is 3/8” OD tubing. the ESOK is 3/4” or 1”.

PLUMBING

ELECTRICAL

CAUTIONS

WARNING

NOTE

Built in the U.S.A.Built in the U.S.A.

WE RECOMMEND THAT A LICENSED ELECTRICIAN WIRE YOUR SYSTEM IN ACCORDANCE WITH

LOCAL AND NATIONAL ELECTRICAL CODES (NEC).

PLUMBING AND ELECTRICAL