Owner's Manual

(ESOK) WIRING DIAGRAM

ESOK ELECTRICAL CONNECTION

1. Attach the oat ball piggyback cord to the male plug end from the pump control box.(2)

The oat switch will now govern whether current will ow to the pump control box or not.

2. Plug the solenoid valve into the female plug end extending from the pump control box (3).

• Float ball facing “UP” = current does not ow (pump o).

• Float ball facing “DOWN” = current ows (pump on).

• When pump control switch is “ON” and oat ball is facing “DOWN” = current will ow to the

solenoid valve and the valve will open.

• When pump control switch is “OFF” or the oat ball is facing “UP” = no current will ow to the

solenoid valve, and the pump will not run.

Built in the U.S.A.Built in the U.S.A.