Owner's Manual

Attach BP-6010-CH chassis to
GX600/1000 housing. Replace caster
nut and washer and tighten.
Cut the 3/8” tubing to the appropriate
length (ensure no kinks or ow
restrictions), and install the 1/2” x 3/8”
stem reducer onto the 3/8” tubing.
Insert the stem reducer into the 1/2”
membrane input tting.
7
Complete assembly as shown, with
red locking clips in the correct places.
8
11
Built in the U.S.A.Built in the U.S.A.
11