Assembly Instructions ASSEMBLY RATING The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling & specific product (with 1 being easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY. PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE BASIC ASSEMBLY TECHNIQUES When lock of spring washer is used in an assembly, please make sure the rock or spring washer is placed between the larger flat washer and the. head of the screw or bolt Position each pant correctly and insert screws or bolts into their respective holes by hand tighten or using the proper hand tool.
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
#( x PCs #F x PCs Attach dowels (#F) on each end of the bar beds then align bar beds (#56) to the headboard legs Secure by using screws #C x PCs #F x docs insert dowels (#F) to each ends of the foot board panel then align foot board panel (#7) fo foot board legs Secure by using screws Page 50f 8
Align side rails to the headboard then insert barrel nuts (#B) fo the inner side holes of the side rails Secure by tightening bolts (#A) onto barrel nuts #A x PCs #B x 4pc; #D x PCs] #E x PCs Align support legs (#10) to the side rails then secure by tightening bolts (#D) to hex caps (HE).
Insert dowels (#F) onto side rails then align side rails to each other as shown in the diagram, #F x pes) #D x PCs #E x PCs Secure side rails to support legs (#10) by tightening bolts (#0) onto hex caps HE).
Align foot board (#7) to the side rails then insert barrel nuts (#B) to the side holes of the side rails Secure by tightening bolts (#A) onto barrel nuts (#8) #A x PCs #B x PCs Align slats (#11) onto side rails, then secure by using screws (#6) Page 8of 8
